{"title":"BowHouse RC","description":"","products":[{"product_id":"bow-bel-0010","title":"BowHouse RC N2R Low CG Battery Tray for Element Enduro","description":"Improving weight distribution is one of the best ways to increase the performance of your scale truck.  Our N2R Low CG Battery Tray for the Element Enduro moves the heaviest component of your truck, the battery, down and forward by 5mm to lower the center of gravity and increase forward weight bias.  The tray works with just about any size pack you'd want to run, big or small.  We've even incorporated a extra wide slot under the tray to hold your battery strap in place along with your servo and accessory wires.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNotes:\u003c\/b\u003e\u003cbr\u003eBattery straps sold separately.  We recommend a non-slip battery strap like our BowHouse RC straps.\u003cbr\u003eEpic Helios RC batteries are sold separately.  But you knew that already...\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489025060,"sku":"BOW-BEL-0010","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BEL-0010-2.jpg?v=1783348604"},{"product_id":"bow-bac-0030-black","title":"Bowhouse RC Thumb Drive for Any Radio","description":"Like to hike or shoot photos while driving? This handy little number allows you to drive with one hand on just about any wheel drive radio. Designed to work with a variety of thumb sizes. Wide thumb dimple area for extreme grip. Uses a 225mm bowhouse battery strap to hold it securely in place at the perfect angle for your style. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003e1x Thumb drive\u003cbr\u003e1x 225mm battery strap\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(191, 191, 191);\"\u003eManufacturer's title: Thumb thumb! Thumb drive for any radio\u003c\/span\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489090596,"sku":"BOW-BAC-0030-BLACK","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BAC-0030-BLACK-2.jpg?v=1783348604"},{"product_id":"bow-b24-0010","title":"Bowhouse RC Low CG Conversion Kit for Axial SCX24","description":"Tiny #tinytrucks are all the rage, and the Axial SCX24 is leading the charge.  You can take your little dynamo to the next level with our BowHouse RC Low CG Conversion Kit for the SCX24.  \u003cbr\u003e\u003cbr\u003e\u003cb\u003eHere are the highlights:\u003c\/b\u003e\u003cbr\u003eLow CG battery tray drops the battery by 4mm down to the top of the rails\u003cbr\u003eLow CG ESC tray rotates and lowers the ESC below the rails\u003cbr\u003eESC tray includes integrated shock mounts in 2 positions for compatibility with all SCX24 models\u003cbr\u003eOption to install battery on ESC tray and ESC on battery tray for maximum forward weight bias\u003cbr\u003eReuses stock hardware for installtion\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003e1x low CG battery tray*\u003cbr\u003e1x low CG ESC tray\u003cbr\u003e\u003cbr\u003e\u003ci\u003e* Epic Helios RC 2S 600 mAh 45C Lipo sold separately, but you knew that already.\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION NOTES\u003c\/b\u003e\u003cbr\u003eBattery tray:\u003cbr\u003eRemove the stock battery tray by removing all 4 screws holding it in place.  Save screws for installation of BowHouse battery tray.\u003cbr\u003eGently spread the chassis rails to remove the stock battery tray from the chassis. \u003cbr\u003eRemove the stock hook-and-loop strap from the stock battery tray and install on BowHouse RC battery tray.\u003cbr\u003eBefore installing the BowHouse battery tray, start a screw into each screw hole in the BowHouse tray for 3-4 turns.\u003cbr\u003eGently spread the chassis rails to insert the BowHouse battery tray in chassis.  You may need to gently bend the upper motor lead down for better clearance.\u003cbr\u003eInsert all 4 screws to secure BowHouse battery tray to chassis.\u003cbr\u003e\u003cbr\u003eESC mount:\u003cbr\u003eRemove the stock body mount(s) from the shock towers and save stock screws.\u003cbr\u003eRemove the stock ESC from the stock ESC mount carefully.  If removed carefully, you can reuse the double stick tape on the bottom of ESC.  If necessary, remove the original double-stick tape and replace with new tape, hot glue, or other adhesive.\u003cbr\u003eUnscrew upper ball studs securing front shocks to shock mounts.\u003cbr\u003eRemove 4 screws holding stock ESC tray in place.\u003cbr\u003eBefore installing the BowHouse ESC mount, start a screw into each screw hole in the BowHouse mount for 3-4 turns.\u003cbr\u003eGently spread chassis rails to remove stock ESC tray and insert BowHouse ESC tray into chassis.\u003cbr\u003eInstall 4 screws holding ESC mount to chassis.\u003cbr\u003eAttach shock ball studs to shock mounts in the appropriate position.  Note that shocks are mounted in front of body mount posts on certain models (e.g., Jeep Wrangler and C10 versions) and behind body posts on other models.\u003cbr\u003eInstall ESC on ESC mount.  For certain models (e.g., Betty and Jeep Wrangler), ESC should be rotated so that the servo wire plugs are on the drivers (left) side and the motor and battery plugs are located toward the front of the truck.  On other models, the ESC can be installed with the servo wire plugs in front and the motor and battery plugs on the passenger side, similar to the stock configuration.\u003cbr\u003eIf the ESC is mounted in the rotated position, we recommend running the servo lead through the space between the chassis rail and the BowHouse ESC mount on the drivers side (see pictures).\u003cbr\u003eInstall body mount(s) into BowHouse RC low CG ESC tray using stock screws.  We recommend using a sewing needle or pin to line up screw holes in ESC tray and body mount(s) before starting the screws.\u003cbr\u003eYou may need a short servo extension to plug lights into ESC if you are using stock headlights. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFOR BATTERY FORWARD CONFIGURATION\u003c\/b\u003e\u003cbr\u003eFollow the same steps to remove stock battery tray and ESC mount.\u003cbr\u003eInstall hook-and-loop battery strap into BowHouse ESC mount instead of on battery tray.\u003cbr\u003eIf you are using stock headlights, you will need a short servo extension cable to connect the lights to the ESC.  On some models, you will also need a short servo extension cable to connect the servo to the ESC.\u003cbr\u003eBattery forward configuration may result in nearly full droop on front shocks depending on your setup.","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489123364,"sku":"BOW-B24-0010","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-B24-0010-2.jpg?v=1783348604"},{"product_id":"bow-bdr-0010","title":"Bowhouse RC Carbon Fiber Battery Tie-Down for DR10","description":"Take your DR10 to the next level with our carbon fiber battery tie-down system.  Our carbon fiber brace is secured by a clasp attached to the gearbox\/rear bulkhead and body clip post on top of the included steering servo mount.  With the included battery stay tabs, you can fine-tune your weight distribution by moving the battery fore or aft in the battery tray area, and you can accommodate different length packs without having to add or remove foam blocks.  Swapping out packs is as simple as pulling off the body clip and lifting the brace to release your pack.\u003cbr\u003e\u003cbr\u003eThese tie-down system works great with the Drag Race Concepts carbon fiber DR10 chassis with the addition of stays to keep the battery from shifting side-to-side.\u003cbr\u003e\u003cbr\u003eThe stock steering servo post-style brackets also work great as side stays when secured to the chassis with M3 screws through the battery strap slots.\u003cbr\u003e\u003cbr\u003eWe have not tested our system with other carbon fiber chassis setups.  Our system should work on other setups as long as the relative positions of the rear bulkhead and steering servo mounts are the same as the stock chassis and there are no obstructions above the battery tray area or steering servo.  However, we cannot guarantee that our system will work on setups other than the ones we've tested. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003eCarbon fiber brace\u003cbr\u003eRear clasp\u003cbr\u003eSteering servo mount\u003cbr\u003e2x upper battery stay tabs\u003cbr\u003e2x M3x16mm BHCS screws (for rear clasp)\u003cbr\u003e2x M3x10mm BHCS screws (for upper battery stays)\u003cbr\u003e1x body clip\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation Notes:\u003c\/b\u003e\u003cbr\u003eRemove the steering servo and posts from the chassis and save the hardware.\u003cbr\u003eMount the steering servo to the included steering servo mount and reattach the servo and mount to the chassis using the stock hardware.\u003cbr\u003eRemove the 2x M3x10mm screws that secure the front of the rear gearbox to the back of the chassis.\u003cbr\u003eInstall the included rear clasp on top of those two gearbox mounting holes with the clasp facing forward and using the included M3x16mm screws.\u003cbr\u003eInsert the carbon fiber brace into the clasp.  Test to make sure the brace can be secured to the body post on top of the steering servo mount using the included body clip and that the brace can pivot up and down freely when not secured to the body post.\u003cbr\u003eInstall 1 or both upper battery stay tabs into slot on carbon fiber brace and adjust location to secure your battery in your preferred location.\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489156132,"sku":"BOW-BDR-0010","price":21.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BDR-0010-2.jpg?v=1783348605"},{"product_id":"bow-bel-0020","title":"Bowhouse RC SVT Low CG Multipurpose Skid for Element and SCX10","description":"\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/vsp_assets_images_Element_skid_comparison_1_a44ffa19-9792-49d3-8d20-eaf85239b3a6.jpg\" style=\"width: 450px;\"\u003e\u003cspan id=\"selection-marker-1\" class=\"redactor-selection-marker\"\u003e\u003c\/span\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/vsp_assets_images_Element_skid_comparison_2_4405444d-86ff-4d44-8646-66ad83fe4797.jpg\" style=\"width: 450px;\"\u003e\u003cbr\u003eDerek the mad scientist (aka SVT923) has been at it again.  This time, he's created the ultimate low CG multipurpose skid for Element and Axial-based trucks. The SVT Low CG Multipurpose Skid for Element and SCX10 (yes...we know it's a mouthful) is truly the Swiss Army knife of skids. Want to lower the transmission by 3mm and improve driveline angles on your Element Enduro? No problem. Swap out the Element's Stealth X transmission for an AX10 transmission? Easy. Install an Element Stealth X transmission in your SCX10 or SCX10 II? We've got you covered. Use the Element IFS conversion kit on your SCX10 or SCX10 II? You guessed it...our newest skid does all of this and more. And as if that weren't enough, we've smoothed out the underside of the skid so that it slides over rocks with ease.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eELEMENT\u003c\/b\u003e\u003cbr\u003eLowers stock transmission by 3mm without impacting ground clearance\u003cbr\u003eImproves driveline angles\u003cbr\u003eAllows installation of Axial AX10 3-gear transmission\u003cbr\u003eWorks with solid front axle and IFS versions of the Element\u003cbr\u003eWorks with both transmission orientations\u003cbr\u003eFits stock Element pivot balls\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSCX10 \/ SCX 10 II\u003c\/b\u003e\u003cbr\u003eLowers transmission by approx. 1mm without impacting ground clearance\u003cbr\u003eAllows installation of Element Stealth X transmission\u003cbr\u003eAllows installation of Element IFS conversion without having to trim skid mounting holes\u003cbr\u003eFits stock Axial pivot balls\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage includes:\u003c\/b\u003e\u003cbr\u003e1 skid\u003cbr\u003e1 transmission spacer\u003cbr\u003e4x M3 x 20mm set screws\u003cbr\u003e4x M3 x 12mm flat head screws\u003cbr\u003e4x M3 locknuts\u003cbr\u003e2x M3 x 12mm BHCS\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation notes:\u003c\/b\u003e\u003cbr\u003eStart by removing stock skid. Save the screws and locknuts used to attach upper links to the chassis, and the screws used to attach the skid in each of the 2 middle holes on each side of the skid.\u003cbr\u003eInsert SVT Multipurpose skid into chassis and use stock screws to attach the skid to the chassis in each of the 2 middle holes on each side.\u003cbr\u003eUse stock screws and locknuts to attach rear and front (if applicable) upper links after installing the skid.\u003cbr\u003eUse M3 x 20mm set screws in place of stock set screws to attach front and rear lower links (or IFS skid and rear lower links if running IFS).\u003cbr\u003eUse 4x M3 x 12mm flat head screws to fasten transmission to skid.\u003cbr\u003eUse 2x M3 x 12mm BHCS screws and M3 locknuts to attach skid to chassis in forward-most skid holes when running IFS setups.  You do not need to use these screws if running solid front axle.\u003cbr\u003eYou do not need to use screws in the forward-most and rearward-most slider holes.\u003cbr\u003eGo out and play!\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489254436,"sku":"BOW-BEL-0020","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BEL-0020-2.jpg?v=1783348604"},{"product_id":"bow-bel-0030-v2","title":"Bowhouse RC N2R Steering Rack for Element Enduro IFS V2","description":"Hats off to the folks at Associated and Element for bringing a durable, narrow-track independent front suspension (IFS) to the scale market.  The only problem is the wonky steering geometry with major bump steer.  But fear not...our all CNC-machined aluminum N2R Steering Rack for Element Enduro IFS fixes the problem by relocating and shortening the tie rods for proper geometry.  V2 now includes bump stops to prevent knuckles from binding into an oversteer position at full lock.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage includes:\u003c\/b\u003e\u003cbr\u003e1x steering rack\u003cbr\u003e2x bump stops\u003cbr\u003e2x M3x12mm BHCS\u003cbr\u003e2x M4x20mm threaded rod\u003cbr\u003e2x pivot ball\u003cbr\u003e2x M3 nut\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation notes:\u003c\/b\u003e\u003cbr\u003eStart by removing front skid plate.  Save skid and all 4 screws for reinstallation later.\u003cbr\u003eUnscrew stock steering rack from bellcranks.  Save the M3x14 BHCS screws and hat bushings for installation of N2R steering rack.\u003cbr\u003eSnap the left and right tie rods (steering links) off of the ballstuds holding them to the stock steering rack.  You will not need to reuse the ballstuds on the steering rack.\u003cbr\u003eRemove the tie rods from the knuckles by unscrewing the ballstud from each knuckle.  Save the M3 nylock nuts for later use.\u003cbr\u003eRemove the ball studs from each bent rod end and reinstall in the opposite orientation with threaded portion of ball stud inside the \"V\" of the bent rod end.\u003cbr\u003eRemove both rod ends from each tie rod metal link.  You will not need to reuse the original metal links.\u003cbr\u003eInsert 1 M4x20mm threaded rod into each of the straight rod ends.\u003cbr\u003eScrew one straight rod end directly into each bent rod end.  Leave 1-2mm gap between rod ends with hole on straight rod ends perpendicular to holes on bent rod ends.  You can adjust the toe-in\/toe-out later by adjusting the spacing between rod ends.\u003cbr\u003eInsert pivot balls into straight rod ends with flanged side of pivot ball facing forward.\u003cbr\u003eAttach the straight rod end side of each tie rod to the steering rack using the included M3x12mm BHCS with the flanged side of the pivot ball facing the steering rack.  Be sure to use thread lock on these screws!\u003cbr\u003eAttach steering rack to bell cranks using the stock M3x14 BHCS screws and hat bushings.  To help eliminate play in the steering due to movement between the hat bushings and pass-through screws, add a small dab of thread lock or glue (CA or E6000) to the threads closest to the screw head and washer before tightening steering rack screws all the way into bell cranks.  Do NOT overtighten screws when attaching the N2R steering rack to the bellcranks (overtightening can cause binding with the N2R rack).\u003cbr\u003eSlide bump stops onto steering arms on knuckles and place M3 nuts into nut pockets in bump stops.\u003cbr\u003eAttach bent rod ends to knuckles from underneath the knuckles by inserting the ball studs through the metal steering arms and pass-through holes in the bump stops.  Secure ball studs using included M3 nuts (NOT locknuts).  Thread lock is optional.\u003cbr\u003eReinstall skid plate.","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489287204,"sku":"BOW-BEL-0030-V2","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BEL-0030-V2-2.jpg?v=1783348605"},{"product_id":"bow-bel-0060","title":"Bowhouse RC SVT Spur Gear Adapter for Element Enduro","description":"Say goodbye to 48P gearing and vehicle specific spurs in your Element Enduro and Stealth X transmission with the SVT Spur Gear Adapter.  Our CNC machined aluminum adapter allows you to use spur gears from Axial, Robinson Racing, Kimbrough, Traxxas and others on your Element Enduro Stealth X transmission for an easy conversion to more durable 32P or .8 Mod gearing with tons of gearing choices.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eHere is a partial list of compatible spur gears that we have tested:\u003c\/b\u003e\u003cbr\u003eAxial: 56T 32P Spur (AXI31027), 87T 48P Spur (AXI30672)\u003cbr\u003eKimbrough: 62T 32P Spur (KIM247)\u003cbr\u003eRobinson Racing: 58T 32P Blackened Steel Spur (RRP1558)\u003cbr\u003eTraxxas: 56T .8 Metric (TRA3957), 54T .8 Metric (TRA5936)\u003cbr\u003eIncision: 56T 32P Spur (INCIRC00402)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINCLUDED IN PACKAGE:\u003c\/b\u003e\u003cbr\u003e1x spur gear adapter\u003cbr\u003e3x M3x6mm screws\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote: \u003c\/b\u003e\u003cbr\u003eYou will need to supply your own spur gear.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION NOTES\u003c\/b\u003e\u003cbr\u003eRemove spur gear cover, stock spur gear and spur gear hubs.  Save spur cover and screws, and M3 locknut for spur gear.\u003cbr\u003eMount your choice of spur gears to the side of the SVT spur gear adapter with the longer shaft using the included M3x6mm screws and thread lock.  IMPORTANT NOTE: The mounting holes have different offsets to accommodate different spur gears.  3 are offset at 22mm and the other three are offset at 23mm.  Make sure you are using the correct set of mounting holes for your choice of spur gear.\u003cbr\u003eSlide spur gear adapter and gear onto transmission input shaft with the spur gear facing away from the transmission.\u003cbr\u003eWe have designed this adapter to have a snug fit on the OEM input shaft.  OEM manufacturing tolerances create minor variance in the thickness of the input shaft, so you may need to press firmly to get the adapter seated on the input shaft.\u003cbr\u003eSecure spur gear with stock M3 locknut and reattach spur gear cover.","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489319972,"sku":"BOW-BEL-0060","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BEL-0060-2.jpg?v=1783348605"},{"product_id":"bow-bel-0040","title":"Bowhouse RC N2R Aluminum Steering Bell Cranks for Element Enduro IFS","description":"After we fixed the wonky steering geometry of the Element IFS with our N2R steering rack, we couldn't resist taking a crack at the bell cranks.  Our N2R Aluminum Steering Bell Cranks for the Element Enduro IFS provide added strength and, when combined with our N2R steering rack, virtually eliminate play in the steering.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage includes:\u003c\/b\u003e\u003cbr\u003e1x left bell crank\u003cbr\u003e1x right bell crank\u003cbr\u003e\u003cbr\u003eN2R steering rack is sold separately and can be found here:\u003cbr\u003e\u003ca href=\"https:\/\/www.rpphobby.com\/product_p\/bow-bel-0030.htm\" target=\"_blank\"\u003eN2R Steering Rack for Element Enduro IFS\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation notes:\u003c\/b\u003e\u003cbr\u003eStart by removing front skid plate.  Save skid and all 4 screws for reinstallation later.\u003cbr\u003eUnscrew steering rack from bellcranks.  Save the M3x14 BHCS screws and hat bushings for reinstallation of steering rack.  If you are using the N2R Steering Rack, you will not need the washers when reinstalling the N2R steering rack onto the N2R Bell Cranks.\u003cbr\u003eUnscrew the bell cranks from the servo mount plate and save the M3x6 FHCS mounting screws.\u003cbr\u003eRemove the servo link from the right side bell crank and save the stock M3x16 BHCS screw.\u003cbr\u003eUnscrew the M3x6 BHCS bearing retainer screws from the steering posts.\u003cbr\u003eTransfer bearings and steering posts from the stock bell cranks to the N2R bell cranks.\u003cbr\u003eReinsert M3x6 BHCS bearing retainer screws using thread lock.\u003cbr\u003eAttach N2R bell cranks to servo mount plate using stock M3x6 FHCS screws ensuring that the top of the steering posts is seated properly in the hex-shaped inset under the servo plate.  Be sure to use thread lock to secure the screws going into the steering posts.\u003cbr\u003eAttach servo link to right side bell crank using the stock M3x16mm BHCS screw with thread lock.  Note that due to the lower profile of the N2R aluminum bell crank arm, there will be several mm of exposed thread between the N2R bell crank and the servo mount plate.  This is normal and will not affect operation.  If you prefer, you can substitute a shorter M3x14 screw for the stock M3x16 screw.\u003cbr\u003eAttach steering rack (N2R or stock) to N2R bell cranks using stock M3x14 BHCS screws and hat bushings.  If you are using the N2R steering rack, do NOT use the stock washers when attaching the steering rack.\u003cbr\u003eReinstall skid plate.\u003cbr\u003e\u003cbr\u003eFor additional information, see the Element IFS Conversion manual \u003ca href=\"https:\/\/img2.associatedelectrics.com\/pdf\/cars_and_trucks\/IFS\/Enduro_RC\/Element-IFS-Conversion_12-3-2019b.pdf\"\u003ehere\u003c\/a\u003e.","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489352740,"sku":"BOW-BEL-0040","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BEL-0040-2.jpg?v=1783348606"},{"product_id":"bow-bel-0035","title":"Bowhouse RC Bump Stops for Element Enduro IFS","description":"These bump stops are designed to work with our CNC-machined aluminum N2R Steering Rack for Element Enduro IFS to prevent knuckles from binding into an oversteer position at full lock.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage includes:\u003c\/b\u003e\u003cbr\u003e2x bump stops\u003cbr\u003e2x M3 nuts\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation notes:\u003c\/b\u003e\u003cbr\u003eRemove tie rods from knuckles.\u003cbr\u003eSlide bump stops onto steering arms on knuckles.\u003cbr\u003eInsert included M3 nuts (NOT locknuts) into pockets in bump stops.\u003cbr\u003eReattach tie rods to knuckles from underneath the knuckles by inserting the ball studs through the metal steering arms and pass-through holes in the bump stops.  Secure ball studs into M3 nuts.  Thread lock is optional.\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489418276,"sku":"BOW-BEL-0035","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BEL-0035-2.jpg?v=1783348605"},{"product_id":"bow-bel-0070","title":"Bowhouse RC Aluminum Servo Mounting Plate for Element IFS","description":"In our endless pursuit to make the Element Enduro IFS platform the best is can be, we turned our attention to the servo mounting plate.  Our CNC mounting plate is significantly stiffer than the stock plastic piece, allowing you to maximize the performance of your servo.  But we didn’t stop there.  We designed our plate so the steering servo mounts from above, making it much easier to service or swap your steering servo.  We also added mounting holes to fit both standard sized servo winches and the Reef’s RC micro servo winch.  Give it a try...we think you'll like it.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInclues:\u003c\/b\u003e\u003cbr\u003eCNC machined aluminum servo mounting plate\u003cbr\u003e4x M3x12mm flat head screws \u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation Notes:\u003c\/b\u003e\u003cbr\u003e-The BowHouse RC CNC machined aluminum servo mounting plate is a direct replacement for the stock mounting plate.  You will reuse all of the stock mounting hardware EXCEPT you will use the included 4x M3x12mm flat head screws to attach the shock towers to the chassis instead of the stock M3x14mm screws. Since this is a director replacement of the stock part, your Element instruction manual is a helpful resource to use during the installation for further assistance.\u003cbr\u003e-Start by removing all 4 screws securing the stock mounting plate to the chassis through the shock towers.  You will NOT reuse these 4 screws.\u003cbr\u003e-Remove the 2 M3x6 flat head screws securing the bell cranks to the stock mounting plate and save these screws.\u003cbr\u003e-Remove the 4 screws that secure the gearbox risers to the mount and save these screws.\u003cbr\u003e-Remove the screws securing the front skid to the front bumper mount and save these screws.\u003cbr\u003e-On one side of the chassis, remove the 2 screws securing the front bumper mount to the chassis and the 2 screws securing the battery tray to the chassis.\u003cbr\u003e-Remove the steering servo from the stock mounting plate and save the servo mount screws.  Note: if you do not have a ball-tipped hex wrench, you may need to detach the rear skid plate from the gearbox mount to access the servo mount screws from underneath.  You can reattach the rear skid as soon as you have removed the steering servo from the stock mounting plate.\u003cbr\u003e-Pull apart the chassis rails to remove the stock mounting plate and insert the BowHouse RC plate.  Make sure that the steering servo ears rest on top of the BowHouse RC plate.  If you are planning to install a servo winch, we recommend installing the winch before you install the BowHouse mounting plate in the chassis.\u003cbr\u003e-Reattach the bell cranks to the BowHouse RC plate using the original M3x6mm flat head screws with thread lock.  Make sure that the steering posts are aligned with the hex pockets on the underside of the BowHouse RC plate.\u003cbr\u003e-Attach the steering servo to the BowHouse RC plate from above using the stock servo mount screws with thread lock.\u003cbr\u003e-Reattach the gearbox risers to the BowHouse RC plate using the stock screws.\u003cbr\u003e-Reattach the shock towers using the included 4x M3x12mm flat head screws with thread lock.\u003cbr\u003e-Reattach the stock bumper mount, battery tray and front skid using the stock hardware.\u003cbr\u003e-Last but not least, get out and drive!","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489451044,"sku":"BOW-BEL-0070","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BEL-0070-2.jpg?v=1783348605"},{"product_id":"bow-bg8-0010","title":"BowHouse RC N2R High Clearance Skid for Redcat Gen8","description":"There are lots of things to like about the Redcat Gen8.  But the bulbous mass under the skid isn't one of them.  No worries...our N2R High Clearance Skid for the Gen8 eliminates that unsightly protrusion and adds over 5mm of ground clearance, allowing your Gen8 to glide over roots and rocks with ease.  Skids are printed in-house using high-strength nylon.\u003cbr\u003e\u003cbr\u003ePackage includes 1 skid and 4x M3 locknuts\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation tips\u003c\/b\u003e\u003cbr\u003eIf you are not planning to replace the stock driveshafts, we do NOT recommend trying to remove them when installing the skid.  \u003cbr\u003eStock driveshafts are secured with red thread-lock that is extremely difficult to remove, and it is NOT necessary to remove the driveshafts to replace the skid.\u003cbr\u003eStart by removing the stock battery tray and transfer case from the stock skid.  Then disconnect all 7 links from the stock skid, followed by the remaining 8 screws that secure the skid to the chassis.\u003cbr\u003eChassis rails will flex enough to allow you to remove the stock skid and install the N2R skid without having to detach bumper mounts or cross-members.\u003cbr\u003eAfter installing the N2R skid, you will need to use the included 4x M3 locknuts to secure the screws that pass through the front and back of the stock sliders into the forward-most and rear-most holes in the stock skid.\u003cbr\u003e\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489483812,"sku":"BOW-BG8-0010","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BG8-0010-2.jpg?v=1783348607"},{"product_id":"bow-bg8-0020","title":"BowHouse RC N2R Panhard Relocation Mount for Redcat GEN8","description":"The Redcat Gen8 is a great truck, but the stock front suspension geometry needs a bit of work.  Unless you like bump steer and off-center axles.  We didn't think you would, and you're not alone.  Enter our N2R Panhard Relocation Mount for the Gen8, CNC machined in aluminum and anodized in black.  With a simple, bolt-on part, we've all but eliminated the bump steer and centered the front axle at normal ride height.  Even better...we've saved you the trouble of having to disassemble the entire front end of the truck just to unscrew the Panhard pivot ball from the axle mount.  It's a win for everyone!\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage includes:\u003c\/b\u003e\u003cbr\u003e    1x N2R Gen8 Panhard Mount\u003cbr\u003e    3x M3x16mm BHCS\u003cbr\u003e    1x pivot ball\u003cbr\u003e\u003cb\u003e\u003cbr\u003eInstallation notes:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e    Start by removing the chassis side Panhard rod end from the pivot ball (you can leave the pivot ball in place).\u003c\/li\u003e\n\u003cli\u003e    Unscrew the pivot ball that attaches the Panhard to the axle and reinstall on the front side of the axle's Panhard mount.\u003c\/li\u003e\n\u003cli\u003e    Remove the screw that secures the left inner fender to the front of the left side shock tower (just ahead of the shock).\u003c\/li\u003e\n\u003cli\u003e    Use one of the included M3x16mm screws to attach the N2R Gen8 Panhard Mount where the left inner fender screw was removed.\u003c\/li\u003e\n\u003cli\u003e    Use a second included M3x16mm screw to secure the N2R Gen8 Panhard Mount to the hole at the front of the stock plastic panhard mount.\u003c\/li\u003e\n\u003cli\u003e    Insert the included pivot ball into the chassis side rod end and attach to the panhard mount using the third included M3x16mm screw.  Use thread lock when attaching the panhard to the mount.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489516580,"sku":"BOW-BG8-0020","price":21.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BG8-0020-2.jpg?v=1783348605"},{"product_id":"bow-bel-0050","title":"Bowhouse RC GCM-BowHouse Hinge Savers for Element Gatekeeper","description":"Hinged body mounts are great...until they break.  With a big assist from our friends at GCM Racing, we are proud to offer these hinge savers for your Element Gatekeeper cage to help keep you from flipping your lid when you flip your lid.  \u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage includes:\u003c\/b\u003e\u003cbr\u003e2x hinge brackets\u003cbr\u003e2x M3x16mm BHCS\u003cbr\u003e2x M3x20mm BHCS\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation notes:\u003c\/b\u003e\u003cbr\u003eRemove the 2 stock hinge screws that attach the cage to the front body mount. \u003cbr\u003eRemove the 2 screws that attach the stinger\/hinge piece to the front section of the tube body.\u003cbr\u003eInsert the hinge brackets using the M3x20mm screws for the hinge screws and the M3x16mm screws to attach the brackets to the stinger and cage.\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489549348,"sku":"BOW-BEL-0050","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BEL-0050-2.jpg?v=1783348605"},{"product_id":"bow-blm-0010","title":"Bowhouse RC Low CG Battery Tray for Losi LMT","description":"The Losi LMT has taken the solid axle monster truck world by storm.  Now it's time to raise the bar on your LMT by lowering the battery with our BowHouse RC Low CG Battery Tray for the Losi LMT.  Lowering the battery significantly improves stability and will help you get the most out of this beast.  \u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage includes:\u003c\/b\u003e\u003cbr\u003e1x Low CG Battery Tray\u003cbr\u003e1x 225mm non-slip battery strap\u003cbr\u003e2x M2.5x12 cap head screws\u003cbr\u003e2x M3x10mm button head screws\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation notes:\u003c\/b\u003e\u003cbr\u003eRemove the stock battery tray from the truck.  Save the 2x M3 locknuts used to secure the rear for use with BowHouse battery tray.\u003cbr\u003eRemove the forward most screws securing the headers to the LMT chassis.\u003cbr\u003eInstall the non-skid battery strap (included) with the non-skid side facing the battery.\u003cbr\u003eInstall the battery tray starting with the included 2x M3x12mm BHCS with M3 locknuts at the rear of the battery tray.  We recommend installing the screws with the screw head inside the battery tray and the M3 locknuts outside the chassis plates.\u003cbr\u003eInstall the front of the battery tray using the 2x M2.5x12mm BHCS screws into the plastic headers. \u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489582116,"sku":"BOW-BLM-0010","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BLM-0010-2.jpg?v=1783348607"},{"product_id":"bow-bsx-0070","title":"Bowhouse RC SVT Panhard Reinforcement Bracket for Axial SCX10 III","description":"There's lots to like about the new Axial SCX10 III, but the Panhard mount on the stock AR45 portal axle housing could use a little help.  We've designed our Panhard reinforcement bracket to bolt right onto the stock housing with no modifications, making installation a snap.  And it's made of CNC machined aluminum to withstand whatever you can throw at it out on the rocks and trails.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage includes:\u003c\/b\u003e\u003cbr\u003ePanhard reinforcement bracket\u003cbr\u003e1x M3 x 8mm flat head screw\u003cbr\u003e1x M3 x 20mm flat head screw\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation notes:\u003c\/b\u003e\u003cbr\u003eStart by removing right front tire. Then remove screw securing right front shock and lower link to the axle housing.\u003cbr\u003eUnscrew panhard mount from axle housing.\u003cbr\u003eSnap panhard reinforcement bracket onto front of axle housing around existing panhard mount so that secondary screw hole is visible through the hole in the axle housing truss.\u003cbr\u003eUse M3 x 8mm flat head screw to secure bracket to axle housing through hole in axle housing truss (thread lock recommended).\u003cbr\u003eUse M3 x 20mm flat head screw to attach panhard to axle (do NOT use thread lock).  Make sure that screw threads all the way into panhard reinforcement bracket.\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489614884,"sku":"BOW-BSX-0070","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BSX-0070-2.jpg?v=1783348608"},{"product_id":"bow-bsx-0060c-v2","title":"BowHouse RC HD Battery Tray + Servo \u0026 Bumper Mount Ver2 for SCX10 II","description":"HD, you ask?  Yes...Heavy Duty!  If you like running steering servos with massive torque and pushing your truck to the limits, you'll love our new HD Battery Tray with Servo and Bumper Mount for the Axial SCX10 II.  We have strengthened every aspect of our popular battery tray and servo mounts and added a beefy front bumper mount for even more strength.  To top it off, we've even incorporated a fairlead for your winch line if you run a servo winch (servo winch mount sold separately).\u003cbr\u003e\u003cbr\u003eThis tray works with all versions of the Axial SCX10 II and can be used in combination with our Forward Mount Transmission Cradle on the kit version.  So go ahead...toss in that 500+ oz-inch servo and give it all you got!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation Tips:\u003c\/b\u003e\u003cbr\u003e1. Before installation, we recommend clearing out the screw mounting holes with a 3\/32\" drill bit running at a slow speed.  This will remove any excess powder left from the finishing process and make it easier to start the screws.\u003cbr\u003e2.  We recommend cleaning out the bumper mount holes with a 5\/16\" drill bit to make it easier for your bumper posts to slide in.\u003cbr\u003e3.  Be careful not to overtighten screws.  We recommend tightening all screws by hand.  You can use a dab of Shoe Goo or E6000 to help keep screws tight.\u003cbr\u003e4.  Add a battery strap and you're ready to hit the trails! \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003cbr\u003e\u003c\/b\u003eMaterial: Nylon - Using MJF (multi-jet fusion) technology.\u003cbr\u003eWidth: 7.1 cm\u003cbr\u003eHeight: 1.8 cm\u003cbr\u003eDepth: 12.5 cm\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489680420,"sku":"BOW-BSX-0060C-V2","price":31.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BSX-0060C-V2-2.jpg?v=1783348607"},{"product_id":"bow-bs6-0010","title":"Bowhouse RC SVT Carbon Fiber Slipper Pads for Axial SCX6","description":"The Axial Racing SCX6 is a beast, but the stock slipper setup isn't quite up to the challenge.  Our SVT Carbon Fiber Slipper Pads take care of this in two ways.  First, the carbon fiber pads are much more durable than the stock pads, and they don’t break down from heat or grease.  Second, we've included Belleville washers to maintain consistent pressure on the slipper plates and pads.  The result is a durable slipper system that allows you to adjust and maintain tension to optimize performance and protect your running gear.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003e2x carbon fiber slipper pads\u003cbr\u003e4x Belleville washers\u003cbr\u003e1x M5 lock nut\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation Notes:\u003c\/b\u003e\u003cbr\u003e-Remove transmission and save all mounting hardware.\u003cbr\u003e-Remove motor and spur cover and save all mounting hardware.\u003cbr\u003e-Remove stock spacer, slipper clutch and spur gear from spur shaft.  You will reuse the spur gear and spacer, but not the stock M5 flanged nut.\u003cbr\u003e-Remove stock slipper plates and clean any grease or oil from the plates. A slipper clutch assembly will not function correctly if grease or oil gets between the pads and slipper plates regardless of the pad material.\u003cbr\u003e-Remove stock slipper pads from spur gear and replace with carbon fiber pads.\u003cbr\u003e-Reinstall spur gear with slipper plates onto spur shaft, followed by stock aluminum spacer.  IMPORTANT NOTE - stock slipper plates are slightly convex (c-shaped) due to the stamping process used to make them.  We recommend installing the plates so the convex side of each plate faces the spur gear to avoid excess pressure between the rim of the plates and the slipper pads.  It should look like this: )I( \u003cbr\u003e-Install desired number of Belleville washers (conical springs) onto slipper shaft and tighten with included M5 lock nut.  We recommend using 2-3 Belleville washers, aligned in the same orientation.  For 2 springs, it should look like this: ))  For 3 springs, it should look like this: )))  The washers should be installed with the concave side facing the slipper plate like this: I))\u003cbr\u003e-Reinstall motor and spur cover on transmission, and then reinstall transmission on skid plate.","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489713188,"sku":"BOW-BS6-0010","price":18.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BS6-0010-2.jpg?v=1783348606"},{"product_id":"bow-bsx-0012s","title":"BowHouse RC Forward Mount Transmission Cradle for SCX10 II Kit Version","description":"This is the front mount transmission cradle for the Axial SCX10 II kit so you can install the motor, transmission, and transfer case in your brand new Axial SCX10 II (SCX10-2) in a forward orientation. Included for a complete, bolt-on solution,is the BowHouse RC SCX10 II side plate spacer.  You will also need to change driveshaft lengths.  The kit has all of the parts needed to adjust stock driveshaft lengths.  In front, BowHouse used AX31114 parts 5 and 7 for the female ends and the male middle piece that had a part number 3 with no tree number in our kit.  In the rear, BowHouse used AX31114 5 and 6 for the female ends and AX 31397 for the male (originally from the front).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003eCradle: Black Strong \u0026amp; Flexible \/ Spacers: Black Nylon\u003cbr\u003eWidth: 7.7 cm\u003cbr\u003eHeight: 1.4 cm\u003cbr\u003eDepth: 2.3 cm\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489745956,"sku":"BOW-BSX-0012S","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BSX-0012S-2.jpg?v=1783348606"},{"product_id":"bow-bsm-0010","title":"Bowhouse RC GCM-BowHouse Diff Cup for SMT10 \/ Wraith \/ Yeti","description":"With much thanks to our good friends at GCM, we are pleased to offer these legendary diff cups for the Axial SMT10, Wraith, Yeti, Exo Terra and other applications that utilize AR60 style internals.\u003cbr\u003e\u003cbr\u003eSo what's different about these diff cups?  Each diff cup includes 2 polished stainless steel shims to isolate the metal-on-metal friction between the output gears and the output bearing area. This allows much cooler bearings and longer life of all the internals. Cases also include a side hole sealed by a grub screw for easy, no-removal oil fill-ups. Simply remove the grub screw to refill your diff fluid as needed without having to disassemble the entire diff, and you are ready to go before you know it.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eEach kit includes the parts you need for 1 axle:\u003c\/b\u003e\u003cbr\u003e1x new billet machined diff cup\u003cbr\u003e1x M3 grub screw for fill-ups\u003cbr\u003e2x outdrive gear shims\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation notes:\u003c\/b\u003e\u003cbr\u003e1) Do NOT use the INSIDE o-ring on the new diff cup side. Use ONLY the OUTSIDE o-ring on the new diff cup.\u003cbr\u003e2) Do NOT overtighten the 4 screws that attach the diff cup to the ring gear (or spur for a center differential).  Axial uses a compression paper gasket to seal the diff to the ring gear, and this gasket can compress MORE than the thickness of both supplied internal shims.  If you overtighten the 4 screws when attaching the diff cup, you may over-compress the diff and cause it to seize up completely.  If you are re-using a gasket, check to make sure that it hasn't been crushed.  If the gasket is crushed, you can either start with a new one (AX30385) or take out the internal diff shims.  Once assembled, diffs should spin freely even without oil and provide very little resistance inside the diff cups.\u003cbr\u003e3) Some cross shafts for the planetary gears are slightly longer than others. If you can't easily slide your planetary gear shaft into the slot in the diff cup, please grind or file the edges of the shaft to be ROUND on the end and not sharp square corners (i.e., go from a shape that looks like [ to a C shape).\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489778724,"sku":"BOW-BSM-0010","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BSM-0010-2.jpg?v=1783348606"},{"product_id":"bow-bs6-0020","title":"Bowhouse RC SGC Panhard Reinforcement Kit for SCX6","description":"The Axial Racing SCX6 is a beast, but the pan hard mounting brackets are just too weak and bend too easily.  Our Nylon reinforced polymer brackets fix this problem.  With a piece that mounts on both the chassis side and the axle side, it virtually eliminates bracket movement and helps prevent bracket breakage.  Simple bolt on product that has been rigorously tested and proved to provide strength for those high power servos and extreme situations.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003e1x Parts Tree\u003cbr\u003e2x M4x30MM button head screws\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation Notes:\u003c\/b\u003e\u003cbr\u003e-Starting on the axle side, remove the right front wheel.\u003cbr\u003e-Remove the screw from the lower shock so you can move the shock out of the way.\u003cbr\u003e-Remove the screw from the upper link and from the pan hard link (save for reuse later).\u003cbr\u003e-Use one supplied 30mm screws to attach the bracket between the upper link mount and the pan hard mount.\u003cbr\u003e-Reuse the Screw on the Pan hard link to C Hub to attach pah hard link. \u003cbr\u003e-Reinstall the shock.\u003cbr\u003e-Reinstall the wheel.\u003cbr\u003e-Move to the chassis side.\u003cbr\u003e-Remove the 2 screws holding the bottom of the shock tower, and the 2 screws on top of the shock tower\/fender.  This should allow the fender to swing out of the way and shock tower to swing freely on the pan hard link.\u003cbr\u003e-Remove the screw from the pan hard link, using one of the 30mm supplied screws, reattach link and bracket at the same time (see pictures). This will stick out past the part in case you want to add a nut later (not supplied)\u003cbr\u003e-Put the shock tower back into place, you will use one of the longer screws left over from the axle step where the new bracket is located. \u003cbr\u003e-Re-Attach the rest of the screws.\u003cbr\u003e-Sit back and admire your handy work.\u003cbr\u003e-Go drive your SCX6 with confidence.\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489811492,"sku":"BOW-BS6-0020","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BS6-0020-2.jpg?v=1783348607"},{"product_id":"bow-blm-0020","title":"Bowhouse RC Low CG Electronics Tray for Losi LMT","description":"If you're looking to take your Losi LMT to the next level, look no further.  Our Low CG Electronics Tray for the LMT is the perfect companion for our popular Low CG Battery Tray.  Our tray allows you to lower your electronics (up to 15 mm lower than the stock mounting location!) to help improve stability, and we've included a receiver box that accepts the stock receiver box cover with a pass-through for ESC and servo leads.  We've even incorporated mounting points for the stock Spektrum ESC and on\/off switch.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage includes:\u003c\/b\u003e\u003cbr\u003e1x Low CG Electronics Tray\u003cbr\u003e4x M3x12 mm button head screws\u003cbr\u003e2x M3x8 mm button head screws\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation notes:\u003c\/b\u003e\u003cbr\u003eRemove 2x M3x14mm cap head screws securing receiver box lid.  Save lid and screws.\u003cbr\u003eRemove M3 grub screw securing antenna tube.  Save grub screw and tube.\u003cbr\u003eRemove M3x10mm screw securing ESC on\/off switch and save.\u003cbr\u003eRemove 2x M3x14mm BHCS screws securing ESC and save these screws. \u003cbr\u003eDisconnect and remove your ESC and receiver.\u003cbr\u003eRemove the 4 screws securing the stock ESC tray through the side cage and remove tray from chassis.  You may need to use some pressure to release stock ESC tray from chassis side plates.\u003cbr\u003eInstall receiver in receiver box portion of BowHouse RC Low CG Electronics Tray and re-connect wires.  Install receiver box lid using stock M3x14mm cap head screws.  Install antenna tube using stock M3 grub screw if desired (optional).\u003cbr\u003eInstall ESC onto BowHouse RC Low CG Electronics Tray.  If using the stock Spektrum receiver, you can re-use the stock M3x14mm BHCS screws to install the ESC, and you can re-use the stock M3x10mm BHCS screw to install the on\/off switch on top of the receiver box portion of the BowHouse tray.  If using an aftermarket ESC, using double-stick tape and\/or zip ties to secure ESC to tray.\u003cbr\u003eInstall BowHouse RC Low CG Electronics Tray onto chassis using included 4x M3x12mm BHCS screws in the stock ESC mounting location.\u003cbr\u003eSecure front of BowHouse RC Low CG Electronics Tray using 2x M3x8mm BHCS screws through the corresponding chassis holes as shown.\u003cbr\u003eLet 'er rip!!!\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489844260,"sku":"BOW-BLM-0020","price":34.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BLM-0020-2.jpg?v=1783348606"},{"product_id":"bow-bsx-0070c","title":"BowHouse RC Servo Winch Bracket for SCX10 II Kit Version","description":"This servo winch bracket allows you to mount a servo winch between the chassis rails behind the center skid when using the BowHouse RC Forward Mount Transmission Cradle with the kit version of the Axial SCX10 II.  Please see pictures for recommended routing of the winch line. \u003cbr\u003e\n\n\u003cbr\u003e\u003cb\u003eWhat's in the box:\u003c\/b\u003e\u003cbr\u003eSCX10 II Chassis Rear Servo Winch Bracket\u003cbr\u003e\u003cb\u003e\u003cbr\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e7.37 x 8.44 x 4.26 cm\u003cbr\u003e\u003cbr\u003e3D printed in black nylon plastic with a matte finish and slight grainy feel.","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489877028,"sku":"BOW-BSX-0070C","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BSX-0070C-2.jpg?v=1783348607"},{"product_id":"bow-bsx-0080","title":"Bowhouse RC SVT 3-Gear Transmission Adapter for SCX10 III","description":"Do you enjoy the Axial SCX10 III but not it’s bulky, complex transmission?  Do you also enjoy the near bulletproof simplicity and minimal drivetrain slop of a classic 3-gear transmission?  And do you like to eliminate unnecessary weight above the chassis rails?  Yeah...we thought so.  That's why we developed the SVT 3-Gear Transmission Adapter for the Axial SCX10 III.  Drop in your favorite Axial AX10 3-gear (or compatible) transmission, or for bonus points, drop in a Stealth X transmission from the Element Enduro to get overdrive to the front axle.  Either way, you'll enjoy a tried and true drivetrain without the hassle of parts and bits you don't need.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003e1x transmission adapter\u003cbr\u003e2x M3 locknuts\u003cbr\u003e4x M3x8mm flat head screws\u003cbr\u003e\u003cbr\u003e\u003ci\u003eNote: You will need to supply your own 3-gear transmission (AX10-compatible or Stealth X).\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation notes:\u003c\/b\u003e\u003cbr\u003eRemove front and rear driveshafts.  Note that driveshaft lengths will change after the transmission conversion due to different location of output shafts.  Final driveshaft lengths after conversion will depend on your wheelbase.  If you are using stock Axial Wild Boar HD driveshafts and do not have spare male\/female ends, we recommend purchasing AXI31114 so that you can adjust the length of your driveshafts as needed.\u003cbr\u003eUnplug dig and shift servos if applicable.\u003cbr\u003eIf you are installing a Stealth X transmission, remove the battery tray located behind the skid or raise it to allow clearance for the rear driveshaft.  If you remove the rear battery tray, you can use the stock battery tray on the slider or relocate the battery to the front of the chassis.\u003cbr\u003eRemove stock transmission from skid and save mounting screws.\u003cbr\u003eInsert 2x M3 locknuts into holes on top of adapter.\u003cbr\u003eMount 3-gear transmission to adapter using the included M3x8mm flat head screws.\u003cbr\u003eMount transmission\/adapter assembly to SCX10 III skid using stock transmission mounting screws.\u003cbr\u003eInstall new driveshafts.\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489909796,"sku":"BOW-BSX-0080","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BSX-0080-2.jpg?v=1783348608"},{"product_id":"bow-btf-0030m","title":"BowHouse RC CNC Metal Rear Leaf Shackle Mount for TF2","description":"This is the CNC aluminum version of our popular Rear Leaf Shackle Mount for the RC4WD TF2.  The mount relocates the rear shackles for better geometry and prevents the shackles from locking in place under full compression. This part is a bolt-on replacement for the stock part and does not require any hardware other than the stock hardware.\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489942564,"sku":"BOW-BTF-0030M","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BTF-0030M-2.jpg?v=1783348607"},{"product_id":"bow-btf-0040","title":"Bowhouse RC Hood Hinge Mount Set for Mojave and Hilux","description":"Bowhouse RC Hood Hinge Mount Set for Mojave and Hilux is a great solution for opening the hood on your Toyota pickup build.  The set is designed to use the hood hinges for the RC4WD Blazer body (Z-S1564, which you must supply).  Includes a structural radiator support that you can use to attach the grill securely in place, along with a cowl support with outer mounting points for the stock windshield and dashboard.  You will need to supply and install your choice of magnets\/latches to keep the hood closed while driving and a hood prop to keep the hood open for display purposes.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003eStructural radiator support allows secure grill attachment even if you cut away lower front fenders and valance\u003cbr\u003e    Cowl support includes outer mounts for windshield and dash to replace molded-in mounts that need to be cut off when opening hood\u003cbr\u003e    Compatible with RC4WD and n00b inner fenders (may require some trimming to clear inner fender bracket)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat's included:\u003c\/b\u003e\u003cbr\u003e1x radiator support\u003cbr\u003e    L and R inner fender brackets with hinge mounts\u003cbr\u003e    1x cowl support\u003cbr\u003e    Underhood brace with hinge mounts\u003cbr\u003e    4x Flat Head Tapping Screw 1.6 X 6mm\u003cbr\u003e    4x Button Head Self Tapping Screws M3 X 8mm\u003cbr\u003e\u003cb\u003e\u003cbr\u003eIMPORTANT NOTES:\u003c\/b\u003e\u003cbr\u003eYou will need to supply RC4WD Chevrolet Blazer Functional Hood and Tailgate Hardware (\u003ca href=\"https:\/\/www.rpphobby.com\/product_p\/rc4z-s1564.htm\" target=\"_blank\"\u003eZ-S1564\u003c\/a\u003e)\u003cbr\u003e    The kit does not include magnets or a hood prop.  You will need to supply those and drill holes as needed to locate them where you choose.\u003cbr\u003e    Like all 3D printed parts, some finishing work will be necessary to achieve smooth surface textures.\u003cbr\u003e\u003cbr\u003eFor more information about installation, please see our build threads on Scale Builder's Guild and RCCrawler:\u003cbr\u003e\u003ca href=\"https:\/\/scalebuildersguild.com\/forum\/showthread.php?27589-Scrunch-and-Dad-(re-)build-a-TF2\"\u003ehttps:\/\/scalebuildersguild.com\/forum\/showthread.ph...\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/scalebuildersguild.com\/forum\/showthread.php?24997-The-long-awaited-LWB-TF2-by-new2rocks\"\u003ehttp:\/\/scalebuildersguild.com\/forum\/showthread.php...\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.rccrawler.com\/forum\/rc4wd-trail-finder-2\/600476-scrunch-dad-re-build-tf2.html\"\u003ehttp:\/\/www.rccrawler.com\/forum\/rc4wd-trail-finder-...\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.rccrawler.com\/forum\/rc4wd-trail-finder-2\/573623-long-awaited-lwb-tf2-new2rocks.html\"\u003ehttp:\/\/www.rccrawler.com\/forum\/rc4wd-trail-finder-...\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.rccrawler.com\/forum\/rc4wd-trail-finder-2\/573623-long-awaited-lwb-tf2-new2rocks.html\" target=\"_blank\"\u003e\u003c\/a\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489975332,"sku":"BOW-BTF-0040","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BTF-0040-2.jpg?v=1783348607"},{"product_id":"bow-btf-0020s","title":"BowHouse RC N2R Coupling Bracket for TF2 LWB","description":"This is a replacement for the stock coupling bracket to be used with the \u003ca href=\"https:\/\/www.rpphobby.com\/product_p\/bow-btf-0014s.htm\" target=\"_blank\"\u003eN2R Low Profile Skid\u003c\/a\u003e for the Trail Finder 2 LWB (TF2 LWB).  The N2R Coupling Bracket raises the hanger bearing to align with the new coupling location once the N2R Low Profile Skid has been installed.  The replacement also uses a larger 5x11x4 bearing (included) for the coupling instead of the smaller stock bearing. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003eBlack Strong \u0026amp; Flexible\u003cbr\u003eWidth: 8.1 cm\u003cbr\u003eHeight: 1.5 cm\u003cbr\u003eDepth: 2.7 cm\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181490040868,"sku":"BOW-BTF-0020S","price":18.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BTF-0020S-2.jpg?v=1783348608"},{"product_id":"bow-btx-0040c","title":"BowHouse RC Servo Winch and Bumper Mount CF for TRX-4","description":"The BowHouse RC Servo Winch and Bumper Mount for the Traxxas TRX-4 bolts replace the stock front bumper mount and allows you install an internal or external spool servo winch.  Internal spool winches install with the body of the servo between the frame rails, and external spool winches install with the body of the servo over the left side frame rail.  Regardless of which style servo winch you use, the servo maintains a low profile along the chassis rails to allow clearance for a wide range of aftermarket bodies.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003eCarbon Fiber Reinforced Nylon\u003cbr\u003eWidth: 7.5 cm\u003cbr\u003eHeight: 6.0 cm\u003cbr\u003eDepth: 6.0 cm","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181490008100,"sku":"BOW-BTX-0040C","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BTX-0040C-2.jpg?v=1783348608"},{"product_id":"bow-btf-0015s","title":"BowHouse RC N2R Low Profile Skid for TF2 v5","description":"BowHouse RC has updated our legendary N2R High Clearance Skid for the RC4WD Trail Finder 2 (TF2) to support RC4WD's new Over\/Under Drive Transfer Case (part Z-U0039) as well as the original Hammer Transfer Case that comes stock on the TF2. And they have done it without sacrificing any of the epic ground clearance you've come to expect!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003eWorks with all versions of the TF2 (standard wheelbase, long wheelbase (LWB) and short wheelbase (SWB))\u003cbr\u003e Works with both versions of the R3 transmission (single-speed and 2-speed)\u003cbr\u003eWorks with both leaf spring and linked suspension setups\u003cbr\u003eWorks with both Hammer and Over\/Under Drive Transfer Cases\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNotes:\u003c\/b\u003e\u003cbr\u003eWe recommend our N2R Coupling Bracket if you are installing on a TF2 LWB.\u003cbr\u003eWe recommend using longer screws and M3 nylock nuts to mount to the chassis.\u003cbr\u003e\u003cbr\u003eSo go ahead...ditch the stock snow shovel and start sliding your TrailFinder 2 over the rocks with ease.\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181490073636,"sku":"BOW-BTF-0015S","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BTF-0015S-2.jpg?v=1783348607"},{"product_id":"bow-btx-0060j","title":"BowHouse RC Low CG Battery Tray Combo for Traxxas TRX-4","description":"For BowHouse RC's first ever injection-molded part, they chose the popular Low CG Battery Tray for the Traxxas TRX-4.  This part is injection molded in a highly durable nylon compound with a matte finish, and it includes slots for standard velcro battery straps so that you can secure your pack.  This combo includes a XL rear chassis brace, allowing you to run packs up to 158mm long without modification.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMore about the battery tray:\u003c\/b\u003e\u003cbr\u003eUsing 3D imaging technology, BowHouse has taken full advantage of nearly every available cubic millimeter to lower the battery tray floor, lowering the center of gravity and making more room for more packs of different shapes and sizes. The battery tray allows packs up to 53mm between the side walls and up to 158mm long when used with our XL rear chassis brace.  That's long enough for most 2S and 3S hard and soft packs like the Helios RC 6000 mAh 100C pack shown in the pictures above.\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181490139172,"sku":"BOW-BTX-0060J","price":27.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BTX-0060J-2.jpg?v=1783348608"},{"product_id":"bow-btx-0030c","title":"BowHouse RC Steering Servo Mount for TRX-4","description":"The BowHouse RC Steering Servo Mount for the Traxxas TRX-4 replaces the stock servo mount and is designed to fit most standard sized servos (like the Holmes Hobbies SHV-500 servo shown in the pictures) without modification. This provides more secure mounting than the stock servo mount when upgrading to a more powerful, standard-sized servo.\u003cbr\u003e\u003cbr\u003eThis version is printed in-house using carbon fiber-reinforced nylon\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181490204708,"sku":"BOW-BTX-0030C","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BTX-0030C-2.jpg?v=1783348608"},{"product_id":"bow-btx-0050c-v2","title":"BowHouse RC N2R High Clearance Skid Ver2 for Traxxas TRX-4","description":"This is the updated version of BowHouse RC's popular N2R High Clearance Skid for the Traxxas TRX-4. 4mm of additional ground clearance is gained compared to the stock skid in critical areas, and they have created smoother surfaces with better angles for sliding over roots and rocks with ease.  V2 is printed in ultra strong, ultra high resolution nylon.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003e(1) Skid\u003cbr\u003e(1) M3x8 FHCS\u003cbr\u003e(2) M3X16 BHCS\u003cbr\u003e(1) M3x8 BHCS\u003cbr\u003e(2) M3x30 BHCS\u003cbr\u003e \u003cbr\u003e\u003cb\u003eInstallation Notes:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003eReuse stock hardware in stock locations \u003cb\u003eEXCEPT\u003c\/b\u003e as follows:\u003c\/li\u003e\u003c\/ul\u003e\u003cdiv style=\"margin-left: 40px;\"\u003e\n\u003cspan\u003e\u003c\/span\u003e(a) use M3x8 FHCS under front of skid to attach transmission (replaces stock M3x10 BHCS)\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv style=\"margin-left: 40px;\"\u003e(b) use M3x16 BHCS to attach front lower links (replaces stock M3x15 BHCS)\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv style=\"margin-left: 40px;\"\u003e(c) use M3x8 BHCS to attach right rear of transmission (replaces stock M3x10 BHCS)\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv style=\"margin-left: 40px;\"\u003e(d) use M3x30 BHCS to attach rear upper links (replaces stock M3x25 BHCS)\u003cbr\u003e\n\u003c\/div\u003e\u003cul\u003e\u003cli\u003eCompletely remove side tray on right side before installing N2R skid.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstall front upper link in N2R skid BEFORE securing the skid to the chassis with the remaining 6 screws.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMake sure the front upper link screw is properly aligned with the receiving hole in the skid opposite the chassis rail before tightening the front upper link screw all the way.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTighten all screws by hand and be careful not to overtighten.  Use of power drivers may result in stripping out screw holes in the N2R skid.\u003c\/li\u003e\u003c\/ul\u003eReplaces BOW-BTX-0050C\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181490237476,"sku":"BOW-BTX-0050C-V2","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-BTX-0050C-V2-2.jpg?v=1783348608"},{"product_id":"bow-sgc-utb18-0001","title":"Bowhouse RC SGC Low Center of Gravity Battery Tray for UTB18","description":"The all new Low Center of Gravity battery tray for the Axial Capra UTB18 helps to reduce weight up high while simultaneously allowing the use of a bigger battery.\u003cbr\u003e\u003cbr\u003eWe have squeezed every millimeter of space out of this small truck that we can to bring you better weight placement and better performance.\u003cbr\u003e","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181490303012,"sku":"BOW-SGC-UTB18-0001","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-SGC-UTB18-0001-2.jpg?v=1783348608"}],"url":"https:\/\/rpphobby.com\/collections\/bowhouse-rc.oembed","provider":"RPP Hobby","version":"1.0","type":"link"}