{"title":"PROTOform","description":"","products":[{"product_id":"prm10139-18","title":"PROTOform VTA Rear Tires Black 31mm Mounted VTA Class (2)","description":"Now pre-mounted for your convenience!\u003cbr\u003e\u003cbr\u003eThis pair of VTA tires is fully-approved for U.S. Vintage Trans-Am Racing and is fully-capable on any surface: carpet, prepared asphalt or parking lots. Utilizing a super long-lasting compound and molding technology perfected by our partners at‚ Pro-Line Racing, we're proud to say these VTA spec tires are 100% Made in the USA\u003cbr\u003e\u003cbr\u003eOn high-grip CRC carpet, these tires have been tested to provide an easy-to-drive handling feel and comparable lap times to previous VTA tires, all without the need for superglued sidewalls. On asphalt, these tires grip well with additives and provide realistic tire screeching sounds for an ultra-scale effect.\u003cbr\u003e\u003cbr\u003ePROTOform's VTA pre-mounts are sold in pairs and mounted our durable, nylon, 8-spoke wheels. The 26mm fronts are 0 offset, while the 31mm rears measure at +6 offset to fill the rear fenders of your 190mm touring car equipped with a PROTOform VTA body\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES\u003c\/b\u003e\u003cbr\u003ePre-mounted for your Convenience\u003cbr\u003eScale Vintage Looks\u003cbr\u003eAvailable in Black or White Colors\u003cbr\u003eLong lasting Tire compound\u003cbr\u003eDurable Nylon Wheel Material\u003cbr\u003eWorks well on any surface\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWHAT'S INCLUDED\u003c\/b\u003e\u003cbr\u003ePre-mounted Rear Tires (2 pcs)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFITS\u003c\/b\u003e\u003cbr\u003eVTA Class Vehicles\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECS\u003c\/b\u003e\u003cbr\u003eDiameter:           64mm\u003cbr\u003eWidth:           31mm\u003cbr\u003e","brand":"PROTOform","offers":[{"title":"Default Title","offer_id":44181634678820,"sku":"PRM10139-18","price":24.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/PRM10139-18-2.jpg?v=1783348943"},{"product_id":"prm1535-30","title":"PROTOform 1971 Pontiac Firebird Trans Am Clear Body VTA Class","description":"Vintage Trams Am class racing has taken off in the past few years as an opportunity for racers to break in to on-road R\/C, providing close racing, scale realism and warm and fuzzy feelings of the good ol’ days of American road course racing.\u003cbr\u003e\u003cbr\u003eThe Pontiac® Firebird Trans Am was one of the signature cars of the former full-scale series, and now PROTOform has captured its trademark look in our release of the 1971 model for your VTA class R\/C Touring Car. From its aggressive front “beak”, to the duck tail-style rear spoiler, to the mother of all macho items, – the shaker hood scoop – no detail was overlooked.  The front nose cone is molded separately, and when mounted with the 2mm screws and\/or liquid adhesive, it becomes an integral part of the body. Because this area of a race body is the most prone to racing wear and tear, a second nose is included.\u003cbr\u003e\u003cbr\u003eThis officially licensed product is produced in genuine .030 Lexan® material and meets all VTA Class rules. The clear body comes with protective overspray film, window masks, detailed decal sheet that lets you choose to style your Firebird as a full-blown race car, or head-turning street machine.\u003cbr\u003e\u003cbr\u003eRecapture the glory years of American road racing with the ’71 Trans Am® from PROTOform!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003eMade with Genuine GE .030 lexan\u003cbr\u003eFits touring cars set up for Vintage Trans Am Rules\u003cbr\u003eExceptional scale detail and realism\u003cbr\u003eFully Licensed by General Motors\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003eClear 1971 Pontiac ® Firebird Trans Am Clear Body\u003cbr\u003eExtra Nose Cone\u003cbr\u003eNose Mounting Hardware\u003cbr\u003eExtensive decal sheet\u003cbr\u003ePaint-then-peel over spray film and window masks\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003eLength: 17.87” (454mm)\u003cbr\u003eWidth (front wheelwells): 7.8” (198mm)\u003cbr\u003eWidth (rear wheelwells): 8.15” (207mm)\u003cbr\u003eHeight: 4.17” (106mm)\u003cbr\u003eWheelbase: 10.24” (260mm)","brand":"PROTOform","offers":[{"title":"Default Title","offer_id":44181634711588,"sku":"PRM1535-30","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/PRM1535-30-2.jpg?v=1783348943"},{"product_id":"prm10139-17","title":"PROTOform VTA Rear Tires White 31mm Mounted VTA Class (2)","description":"Now pre-mounted for your convenience!\u003cbr\u003e\u003cbr\u003eThis pair of VTA tires is fully-approved for U.S. Vintage Trans-Am Racing and is fully-capable on any surface: carpet, prepared asphalt or parking lots. Utilizing a super long-lasting compound and molding technology perfected by our partners at‚ Pro-Line Racing, we're proud to say these VTA spec tires are 100% Made in the USA\u003cbr\u003e\u003cbr\u003eOn high-grip CRC carpet, these tires have been tested to provide an easy-to-drive handling feel and comparable lap times to previous VTA tires, all without the need for superglued sidewalls. On asphalt, these tires grip well with additives and provide realistic tire screeching sounds for an ultra-scale effect.\u003cbr\u003e\u003cbr\u003ePROTOform's VTA pre-mounts are sold in pairs and mounted our durable, nylon, 8-spoke wheels. The 26mm fronts are 0 offset, while the 31mm rears measure at +6 offset to fill the rear fenders of your 190mm touring car equipped with a PROTOform VTA body\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES\u003c\/b\u003e\u003cbr\u003ePre-mounted for your Convenience\u003cbr\u003eScale Vintage Looks\u003cbr\u003eAvailable in Black or White Colors\u003cbr\u003eLong lasting Tire compound\u003cbr\u003eDurable Nylon Wheel Material\u003cbr\u003eWorks well on any surface\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWHAT'S INCLUDED\u003c\/b\u003e\u003cbr\u003ePre-mounted Rear Tires (2 pcs)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFITS\u003c\/b\u003e\u003cbr\u003eVTA Class Vehicles\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECS\u003c\/b\u003e\u003cbr\u003eDiameter:           64mm\u003cbr\u003eWidth:           31mm\u003cbr\u003e","brand":"PROTOform","offers":[{"title":"Default Title","offer_id":44181634744356,"sku":"PRM10139-17","price":24.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/PRM10139-17-2.jpg?v=1783348943"},{"product_id":"prm10140-17","title":"PROTOform VTA Front Tires White 26mm Mounted VTA Class (2)","description":"Now pre-mounted for your convenience\u003cbr\u003e\u003cbr\u003eThis pair of VTA tires is fully-approved for U.S. Vintage Trans-Am Racing and is fully-capable on any surface: carpet, prepared asphalt or parking lots. Utilizing a super long-lasting compound and molding technology perfected by our partners at Pro-Line Racing, we're proud to say these VTA spec tires are 100% Made in the USA.\u003cbr\u003e\u003cbr\u003eOn high-grip CRC carpet, these tires have been tested to provide an easy-to-drive handling feel and comparable lap times to previous VTA tires, all without the need for superglued sidewalls. On asphalt, these tires grip well with additives and provide realistic tire screeching sounds for an ultra-scale effect.\u003cbr\u003e\u003cbr\u003ePROTOform's VTA pre-mounts are sold in pairs and mounted our durable, nylon, 8-spoke wheels. The 26mm fronts are 0 offset, while the 31mm rears measure at +6 offset to fill the rear fenders of your 190mm touring car equipped with a PROTOform VTA body\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES\u003c\/b\u003e\u003cbr\u003ePre-mounted for your Convenience\u003cbr\u003eScale Vintage Looks\u003cbr\u003eAvailable in Black or White Colors\u003cbr\u003eLong lasting Tire compound\u003cbr\u003eDurable Nylon Wheel Material\u003cbr\u003eWorks well on any surface\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWHAT'S INCLUDED\u003c\/b\u003e\u003cbr\u003ePre-mounted Front Tires (2 pcs)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFITS\u003c\/b\u003e\u003cbr\u003eVTA Class Vehicles\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECS\u003c\/b\u003e\u003cbr\u003eDiameter:           64mm\u003cbr\u003eWidth:           26mm","brand":"PROTOform","offers":[{"title":"Default Title","offer_id":44181634809892,"sku":"PRM10140-17","price":24.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/PRM10140-17-2.jpg?v=1783348942"},{"product_id":"prm10140-18","title":"PROTOform VTA Front Tires Black 26mm Mounted VTA Class (2)","description":"Now pre-mounted for your convenience\u003cbr\u003e\u003cbr\u003eThis pair of VTA tires is fully-approved for U.S. Vintage Trans-Am Racing and is fully-capable on any surface: carpet, prepared asphalt or parking lots. Utilizing a super long-lasting compound and molding technology perfected by our partners at Pro-Line Racing, we're proud to say these VTA spec tires are 100% Made in the USA.\u003cbr\u003e\u003cbr\u003eOn high-grip CRC carpet, these tires have been tested to provide an easy-to-drive handling feel and comparable lap times to previous VTA tires, all without the need for superglued sidewalls. On asphalt, these tires grip well with additives and provide realistic tire screeching sounds for an ultra-scale effect.\u003cbr\u003e\u003cbr\u003ePROTOform's VTA pre-mounts are sold in pairs and mounted our durable, nylon, 8-spoke wheels. The 26mm fronts are 0 offset, while the 31mm rears measure at +6 offset to fill the rear fenders of your 190mm touring car equipped with a PROTOform VTA body\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFEATURES\u003c\/b\u003e\u003cbr\u003ePre-mounted for your Convenience\u003cbr\u003eScale Vintage Looks\u003cbr\u003eAvailable in Black or White Colors\u003cbr\u003eLong lasting Tire compound\u003cbr\u003eDurable Nylon Wheel Material\u003cbr\u003eWorks well on any surface\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWHAT'S INCLUDED\u003c\/b\u003e\u003cbr\u003ePre-mounted Front Tires (2 pcs)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFITS\u003c\/b\u003e\u003cbr\u003eVTA Class Vehicles\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECS\u003c\/b\u003e\u003cbr\u003eDiameter:           64mm\u003cbr\u003eWidth:           26mm","brand":"PROTOform","offers":[{"title":"Default Title","offer_id":44181634842660,"sku":"PRM10140-18","price":24.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/PRM10140-18-2.jpg?v=1783348942"},{"product_id":"prm1558-40","title":"PROTOform 1968 Ford Mustang Clear Body VTA Class","description":"The Mustang nameplate has long been synonymous with American muscle car per\u003cbr\u003e\u003cbr\u003eformance, and now we’re proud to add to our Vintage Trans-Am racing body lineup with our rendition of the 1968 Ford® Mustang.\u003cbr\u003e\u003cbr\u003eFrom the signature fastback roofline, to the aggressive stance, to the hood and pillar vents, every detail of the iconic pony car has been captured for an exceptionally scale look. Once again we’ve used the latest molding technology to form this body from single piece of polycarbonate while still maintaining realistic front and rear undercuts. No more add-on front or rear clips to assemble.\u003cbr\u003e\u003cbr\u003eThis officially-licensed product is meets all VTA Class rules and includes a detailed decal sheet, protective overspray film and window masks.\u003cbr\u003e\u003cbr\u003eRecapture the glory years of American road racing with the ’68 Mustang from PROTOform!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003eOne-piece design with realistic undercuts\u003cbr\u003eFits 190mm touring cars set up for Vintage Trans Am Rules or 200mm TC\/Pan Cars\u003cbr\u003eExceptional scale detail\u003cbr\u003eOfficially licensed by Ford®\u003cbr\u003eMade in the USA\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003eClear 1968 Ford® Mustang Body\u003cbr\u003eDecal sheet\u003cbr\u003ePaint-then-peel over spray film and window masks\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003eLength: 17” (431mm)\u003cbr\u003eWidth: 8.07” (205mm)\u003cbr\u003eHeight: 4.17” (106mm)\u003cbr\u003eWheelbase: 10.24” (260mm)","brand":"PROTOform","offers":[{"title":"Default Title","offer_id":44181634940964,"sku":"PRM1558-40","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/PRM1558-40-2.jpg?v=1783348942"},{"product_id":"prm1571-40","title":"PROTOform Chevrolet Corvette C7 Pro-Mod Clear Drag Body","description":"PROTOform has a long heritage in RC Drag Racing. In fact, the first body our brand ever released back in 1992 was a Stealth Funny Car! So we’re getting back to our roots by introducing PROTOform’s first-ever body dedicated to the fast-growing SC Drag Racing class: the Chevrolet® Corvette™ C7 Pro-Mod. This body will transform your Slash® 2wd into a scale 1\/4-mile beast with a ton of realistic details to give your SC drag car a super unique, race-inspired look.\u003cbr\u003e\u003cbr\u003eThe C7 Pro-Mod is a convenient 1-piece body design with no assembly necessary: just paint it up in your favorite colors and start burning rubber! We recommend using Pro-Line’s Hoosier 2.2\" Drag Racing Front Tires on the front and Hoosier Drag Slick SC 2.2\"\/3.0\" Drag Racing Tires in the rear combined with a set of our Pomona Drag Spec Wheels for the ultimate scale hot-rod stance.\u003cbr\u003e\u003cbr\u003eTo create a more scale look, the body is designed with a narrower track width than a traditional SC body and will require some modifications to your 2wd Slash® in order to fit correctly.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eHere is the list of modifications needed to fit:\u003c\/b\u003e\u003cbr\u003ePro-Line Extended Body Mounts for Slash® 2wd Tech tip: install the front mounts upside down to get the nose of the body as low as possible!\u003cbr\u003eTraxxas® Bandit® Front Arms - #2531X\u003cbr\u003eTraxxas® Bandit® Rear Arms - #2750R\u003cbr\u003eTraxxas® Bandit® Front Caster Blocks - #2432\u003cbr\u003eTraxxas® Bandit® Steering Blocks - #3636\u003cbr\u003eTraxxas® Bandit® Axles - #2437\u003cbr\u003eTraxxas® King Pins - #3740\u003cbr\u003eTraxxas® Front Camber Turnbuckles - #2444\u003cbr\u003eTraxxas® Rear Turnbuckles - #2443\u003cbr\u003eTraxxas® Toe Link Turnbuckles - #2445\u003cbr\u003eShorten Rear Drive Shafts\u003cbr\u003eRemove Front Bumper\u003cbr\u003e\u003cbr\u003eThis officially licensed body is Made in the USA from our crystal-clear polycarbonate and includes a detailed decal sheet and window masks. Give your SC drag car the most unique look at the strip with PROTOform's Chevrolet® Corvette™ C7!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003eModern, sleek Pro-Mod styling\u003cbr\u003eIncredible scale details\u003cbr\u003eOfficially-licensed by General Motors\u003cbr\u003e1-piece design\u003cbr\u003eMade in the USA from durable polycarbonate\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003eClear Chevy® Corvette™ C7 Pro-Mod Body\u003cbr\u003eDetailed Decal sheet\u003cbr\u003ePaint-then-peel over spray film \u0026amp; window masks\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFits:\u003c\/b\u003e\u003cbr\u003eSlash® 2wd Modified into a narrow Pro-Mod Drag Car (See Description for Details)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003eLength: 25.5\" (647mm)\u003cbr\u003eWidth, front: 11.125\" (282mm)\u003cbr\u003eHeight: 11.25\" (285mm)\u003cbr\u003eWheelbase: 13.2\" (335mm)","brand":"PROTOform","offers":[{"title":"Default Title","offer_id":44181635006500,"sku":"PRM1571-40","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/PRM1571-40-2.jpg?v=1783348942"},{"product_id":"prm1579-30","title":"PROTOform 1967 Dodge Dart Clear Body VTA Class","description":"PROTOform is once again throwing it back to the glory days of American road racing with the latest entry in our line of bodies for Vintage Trans-Am racing: the 1967 Dodge Dart.\u003cbr\u003e\u003cbr\u003eThe Dart was one of most unique cars in the famous Trans-Am series, with its flat-sided, compact-muscle look. PROTOform has captured all the details of the 3-time race-winning car in 1:10 size, to fit 190mm touring cars fitted with our VTA tires \u0026amp; wheels. For more aero tuning, an add-on decklid spoiler is also included.\u003cbr\u003e\u003cbr\u003eThis officially licensed body is formed from a single piece of high-quality, light weight polycarbonate and requires no assembly. The Dart meets all VTA Class rules and includes a detailed decal sheet with rear stripes, protective overspray film, and window masks.\u003cbr\u003e\u003cbr\u003eHit the track in retro-Mopar style with the 1967 Dodge Dart from PROTOform!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003eMade with High Quality, Lightweight Polycarbonate\u003cbr\u003eOne-piece Design with Realistic Undercuts\u003cbr\u003eFits Touring Cars set up for Vintage Trans Am Rules\u003cbr\u003eExceptional Scale Detail\u003cbr\u003eFully Licensed by Dodge\u003cbr\u003eMade in the USA\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003eClear 1967 Dodge Dart Body\u003cbr\u003eDecal Sheet\u003cbr\u003eSpoiler Mounting Hardware\u003cbr\u003ePaint-then-peel Over Spray Film and Window Masks\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFits:\u003c\/b\u003e\u003cbr\u003eVTA Class\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003eLength: 18\" (457mm)\u003cbr\u003eWidth Front: 7.83\" (199mm)\u003cbr\u003eWidth Rear: 8.1\" (205mm)\u003cbr\u003eHeight: 4.25\" (108mm)\u003cbr\u003eWheelbase: 10.24\" (260mm)\u003cbr\u003e","brand":"PROTOform","offers":[{"title":"Default Title","offer_id":44181635072036,"sku":"PRM1579-30","price":30.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/PRM1579-30-2.jpg?v=1783348943"},{"product_id":"prm1585-00","title":"PROTOform 1\/10 Nissan GT-R R35 Pro-Mod Clear Drag Body","description":"PROTOform is proud to announce a partnership with Nissan®! This collaboration begins with bringing the car they call \"Godzilla\" to the No Prep RC Drag Racing scene for the first time: the Nissan® GT-R™ R35 Pro Mod.\u003cbr\u003e\u003cbr\u003eThe officially licensed body is the ultimate aerodynamic upgrade to your Losi® 22S™ No Prep Drag Car or other 13.2\" wheelbase drag car. We combined the signature wide-mouth grille, side vents, and powerful stance of the R35 GT-R™ with some stretched, pro-mod drag racing proportions to transform your no-prep car into a scale-1\/4-mile import beast.\u003cbr\u003e\u003cbr\u003eThe GT-R™ Pro Mod features a built-in spoiler, but for top-level Outlaw Class racers, we recommend pairing the GT-R™ with the upgrade Outlaw Wing Kit (PRM173300) for maximum stability and performance at blazing fast speeds. Just trim the rear spoiler lip off your GT-R™ and mount the wing on the conveniently marked dimples.\u003cbr\u003e\u003cbr\u003eThe Nissan® GT-R™ Pro Mod body is Made in the USA from our crystal-clear polycarbonate and includes a detailed decal sheet and window masks. Give your SC drag car the most unique look at the strip with PROTOform's Nissan® GT-R™ R35 Pro Mod!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003eOfficially Licensed by Nissan\u003cbr\u003eState of the Art Aerodynamics\u003cbr\u003eImport Pro-Mod Styling\u003cbr\u003eAdd the PRM173300 Outlaw Wing (Sold Separately) if Your Drag Car is Blazing Fast\u003cbr\u003ePaint-then-peel Overspray Film Built-in\u003cbr\u003eMade with Crystal Clear Polycarbonate\u003cbr\u003eMade in the USA, since 1982\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFour Steps to Drag Race Ready:\u003c\/b\u003e\u003cbr\u003eClean Body and apply included window mask\u003cbr\u003ePaint then peel the over-spray film off\u003cbr\u003eSticker your body (decal sheet included)\u003cbr\u003eMount your new body onto your Drag Car\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFits:\u003c\/b\u003e\u003cbr\u003eLosi® 22S™ No Prep Drag Cars (LOS03041 \u0026amp; LOS03035)\u003cbr\u003eOther 13.2\" Wheelbase Drag Cars\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003eLength: 25.1\" (637mm)\u003cbr\u003eWidth (Front): 11.0\" (280mm)\u003cbr\u003eWidth (Rear): 11.25\" (285mm)\u003cbr\u003eHeight: 5.85\" (148mm)\u003cbr\u003eWheelbase: 13.2\" (335mm)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003e(1) Clear Nissan® GT-R™ Pro Mod Body\u003cbr\u003e(1) Decal Sheet\u003cbr\u003e(1) Window Masks\u003cbr\u003e(1) Paint-then-peel Overspray Film\u003cbr\u003e\u003cbr\u003e\u003ci\u003eNissan Motor Co., Ltd. Trademarks, designs, copyrights and\/or other intellectual property rights are under license.\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003eThis is sold as a clear and unpainted body. Image of the painted body is only to display details. No vehicle chassis is included with this product.\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003ePRM1585-00 | Nissan® GT-R™ R35 Pro Mod Clear Body for Losi® 22S™ No Prep Drag Car \u0026amp; Other SC-Based Drag Cars\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e","brand":"PROTOform","offers":[{"title":"Default Title","offer_id":44181635137572,"sku":"PRM1585-00","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/PRM1585-00-2.jpg?v=1783348943"},{"product_id":"prm1585-14","title":"PROTOform Nissan GT-R R35 Pro-Mod Tough-Color (Gray) Drag Body","description":"Now available in Tough-Color Stone Gray material! Tough-Color polycarbonate is made from gray material, giving you a faster way to get to your local strip with no paint needed! Included are stylish red \u0026amp; black factory livery graphics and realistic window stickers.\u003cbr\u003e\u003cbr\u003eThe officially licensed body is the ultimate aerodynamic upgrade to your Losi® 22S™ No Prep Drag Car or other 13.2\" wheelbase drag car. We combined the signature wide-mouth grille, side vents, and powerful stance of the R35 GT-R™ with some stretched, pro-mod drag racing proportions to transform your no-prep car into a scale-1\/4-mile import beast.\u003cbr\u003e\u003cbr\u003eThe GT-R™ Pro Mod features a built-in spoiler, but for top-level Outlaw Class racers, we recommend pairing the GT-R™ with the upgrade Outlaw Wing Kit (PRM173300) for maximum stability and performance at blazing fast speeds. Just trim the rear spoiler lip off your GT-R™ and mount the wing on the conveniently marked dimples.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003eOfficially licensed by Nissan®\u003cbr\u003eState of the Art Aerodynamics\u003cbr\u003eImport Pro-Mod Styling\u003cbr\u003eAdd the PRM173300 Outlaw Wing (sold separately) if your Drag Car is Blazing Fast\u003cbr\u003ePaint-then-peel Overspray Film Built-in\u003cbr\u003eMade in the USA, since 1982\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003e(1) Nissan GT-R Pro Mod Stone Gray Body\u003cbr\u003e(3) Decal Sheets\u003cbr\u003ePaint-then-peel Overspray Film\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFits:\u003c\/b\u003e\u003cbr\u003eLosi® 22S™ No Prep Drag Cars (LOS03041 \u0026amp; LOS03035)\u003cbr\u003eOther 13.2\" Wheelbase Drag Cars\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003eLength: 25.1\" (638 mm)\u003cbr\u003eWidth: 11.3\" (286 mm)\u003cbr\u003eHeight: 5.9\" (149 mm)\u003cbr\u003eWheelbase: 13.2\" (335 mm)\u003cbr\u003e\u003cbr\u003e\u003ci\u003eNissan Motor Co., Ltd. Trademarks, designs, copyrights and\/or other intellectual property rights are under license.\u003cbr\u003e\u003c\/i\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(191, 191, 191);\"\u003eManufacturer's title: 1\/10 Nissan GT-R R35 Pro Mod Tough-Color Gray Body: Drag Car\u003c\/span\u003e\u003cbr\u003e","brand":"PROTOform","offers":[{"title":"Default Title","offer_id":44181635203108,"sku":"PRM1585-14","price":47.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/PRM1585-14-2.jpg?v=1783348943"},{"product_id":"prm1733-00","title":"PROTOform 1\/10 Outlaw Wing Kit for Nissan GT-R PRM158500 Body","description":"This is an Outlaw Clear Wing Kit for the PROTOform PRM1585-00 Pro Mod Body. For top-level Outlaw Class racers, the Outlaw Wing kit is a must-have upgrade for maximum stability and performance at blazing fast scale-1\/4-mile speeds.\u003cbr\u003e\u003cbr\u003eThe wing is made up of 2 aggressive side dams and a main rear deck, contoured perfectly to the PRM158500 body for a precise fit. It features 3 sets of fore \u0026amp; aft mounting holes in 6mm increments to tune the car to your track conditions, as well as 2 different height trimlines to fit any class rules, including NPRC. Mounting is easy: just trim the rear spoiler lip off the body, slide the main center wing under the rear deck, mount on the conveniently marked dimples using the supplied M3 hardware, and add the side dams.\u003cbr\u003e\u003cbr\u003eAs always, the Outlaw wing is Made in the USA from high-quality clear polycarbonate. Don't get left in the dust: get the Outlaw Wing kit for your GT-R™ Pro Mod body today!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003eAerodynamic Upgrade for PRM158500\u003cbr\u003eIncreased Stability\u003cbr\u003ePrecise Fit\u003cbr\u003eEasy to Install\u003cbr\u003eA Must-Have PRM158500 Upgrade if Your Drag Car is Blazing Fast\u003cbr\u003eMade in the USA, since 1982\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFits:\u003c\/b\u003e\u003cbr\u003ePRM158500 Pro Mod Body\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003e(1) Clear Outlaw Wing, Untrimmed\u003cbr\u003e(11) M3 x 6 Screws\u003cbr\u003e(11) M3 Nuts\u003cbr\u003e(1) Paint-then-peel Overspray Film\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003eBody Style: Outlaw Wing Kit\u003cbr\u003eMaterial: Polycarbonate\u003cbr\u003eProduct Height: 2.87\" (73 mm)\u003cbr\u003eProduct Length: 7.87\" (200 mm)\u003cbr\u003eProduct Width: 10.2\" (259 mm)\u003cbr\u003eColor: Clear\u003cbr\u003eScale: 1\/10\u003cbr\u003eVehicle Type: Drag Car\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003eThis is sold clear and unpainted. Image of the painted body is only to display details. No vehicle chassis is included with this product.\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003ePRM173300 | Outlaw Clear Wing Kit for PRM158500 Pro Mod Body\u003c\/i\u003e\u003cbr\u003e","brand":"PROTOform","offers":[{"title":"Default Title","offer_id":44181635235876,"sku":"PRM1733-00","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/PRM1733-00-2.jpg?v=1783348944"},{"product_id":"prm1594-00","title":"PROTOform 1970 Plymouth Barracuda Clear Body for VTA Class","description":"PROTOform is once again throwing it back to the glory days of American road racing with the latest entry in our line of bodies for Vintage Trans-Am racing: the 1970 Plymouth Barracuda.\u003cbr\u003e\u003cbr\u003eFrom its muscular stance and hood scoop to the deep-set front grille and built-in rear spoiler, all the details of the classic Mopar are faithfully recreated in 1\/10 detail. This body is made from high-quality polycarbonate in the USA and includes an extensive decal sheet with fender stripes along with window masks.\u003cbr\u003e\u003cbr\u003eGive your VTA car a tough look at the track with this realistic 1970 Plymouth Barracuda body from PROTOform!\u003cbr\u003e\u003cbr\u003eThis is sold as a clear and unpainted body. Image of the painted body is only to display details. No vehicle chassis is included with this product.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003eOfficially Licensed 1970 Plymouth Barracuda\u003cbr\u003eTrue Scale Mopar Looks \u0026amp; Performance\u003cbr\u003eMuscular Stance\u003cbr\u003eDeep-set Front Grille and Built-in Rear Spoiler\u003cbr\u003ePaint then Peel Overspray Film Built-in\u003cbr\u003eMade with Crystal Clear Polycarbonate\u003cbr\u003eMade in the USA\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFour Steps to Race Ready:\u003c\/b\u003e\u003cbr\u003eClean Body and apply included window mask\u003cbr\u003ePaint then peel the over-spray film off\u003cbr\u003eSticker your body (decal sheet included)\u003cbr\u003eMount your new body onto your VTA Chassis\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFits:\u003c\/b\u003e\u003cbr\u003eVTA Class\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003e(1) 1970 Plymouth Barracuda Clear Body\u003cbr\u003e(1) Window Mask Sheet\u003cbr\u003e(1) Detailed Decal Sheet\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003eLength: 17.75\" (450mm)\u003cbr\u003eWidth: 7.8\" (200 mm)\u003cbr\u003eHeight: 4.25\" (108 mm)\u003cbr\u003eWheelbase: 10.25\" (260 mm)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(191, 191, 191);\"\u003eManufacturer's Title: 1\/10 1970 Plymouth Barracuda Clear Body: Vintage Trans-Am\u003c\/span\u003e","brand":"PROTOform","offers":[{"title":"Default Title","offer_id":44181635268644,"sku":"PRM1594-00","price":30.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/PRM1594-00-2.jpg?v=1783348944"}],"url":"https:\/\/rpphobby.com\/collections\/protoform.oembed","provider":"RPP Hobby","version":"1.0","type":"link"}