|
|
|
|
** Available for Pre-Order ** ETA Late DecemberNote: Orders placed with Pre-Order items are held until the Pre-Order item is available and the order ships complete. All orders must be paid in full at the time the order is placed. See our terms and policies page for more information. ETA shown is strictly ESTIMATED time of arrival as provided to us by the Distributor and/or Manufacturer. Contact 707-462-4152 Or [email protected] for split shipment options.
The 1/18 scale UTB18 Capra 4WS dominates trails indoors and out,
with 4-wheel steering, portal axles, and licensed Mickey Thompson tires.
Its stand-alone ESC and 5-channel receiver easily accommodate
transmitter upgrades and more lighting options.
Overview: The
Axial UTB18 Capra 4WS Unlimited Trail Buggy climbs to the summit of the
mini RC crawler category with the best features for crawling on
challenging indoor and outdoor trails. It's also fully ready-to-run, and
at 1/18 scale, very affordable. Whether you're a veteran RC crawling
enthusiast or a new modeler bringing home your first RC rig, the UTB18
Capra 4WS makes it easy to add adventure to your life almost anywhere.
No
previous 1/18 scale RTR mini crawler has offered this level of
performance and value. Four-wheel steering gives the UTB18 Capra 4WS
impressive maneuverability, whether you're climbing rock ledges, flexing
over obstacles, or squeezing through tight notches. Portal axles with
Currie F9 housings provide the high clearance to navigate those rougher,
tougher trails. Officially licensed Mickey Thompson Baja Pro X tires
mounted to Pro-Line Holcomb Crawler Bead-Loc wheels supply the grip to
get through extreme terrain.
The rig's 4-link suspension geometry
provides smooth, consistent articulation without the bump steer found
in 3-link designs. For increased performance and durability, the lower
links are made of stainless steel. Add in the quick, strong steering of
its axle-mounted, 1/10 scale servo, and the UTB18 Capra 4WS is ready to
conquer challenges indoors and out – and even outperform some larger
rock crawlers.
Then there's the UTB18 Capra 4WS 4-wheel steering
system. It's never been easier to tightly follow the line that leads
from “here” to “there”. Three steering modes – for no rear tire input,
mirrored rear tire input, or “crab crawl” – can be activated from the
included 3-channel Spektrum SLT3 2.4GHz transmitter. These modes provide
the flexibility you need to maneuver over or around almost anything in
your way. All drivers gain new terrain conquering ability!
The
scaled-down Capra tube chassis adds realistic trail buggy looks, with
helmeted driver and passenger figures, LED headlights, rock lights, and
light bar. Choose from two new paint scheme and livery options. One has a
gray cage and blue body panels with licensed King Shocks livery. The
other has a black cage and yellow body panels with licensed Mickey
Thompson Tire livery.
The UTB18 Capra 4WS ready-to-run package
includes high-quality Spektrum electronics for maximum value. The
stand-alone Spektrum Firma 25A brushed ESC and Spektrum 5-channel SR515
dual protocol receiver accommodate additional lighting options and
transmitter upgrades. The Spektrum Smart 650mAh 2S LiPo battery powers
the rig through 30+ minutes of uninterrupted adventure. Recharge the
battery quickly and easily with the supplied Spektrum Smart USB-C
charger.
Whether you're looking for an inexpensive entry into RC
crawling or want to add a mini to your collection of Axial rigs, prepare
to be won over by the features, capabilities, looks, and value of the
UTB18 Capra 4WS/4WD Unlimited Trail Buggy. Plus, many Axial UTB18 option
parts are already available for when you're ready to add upgrades.
Includes: (1) Axial UTB18 Capra 4WS Unlimited Trail Buggy RTR with: (1) Fully assembled chassis, drivetrain, and suspension (1) Spektrum 3-Channel SLT3 2.4GHz Transmitter (1) Spektrum 5-Channel SR515 Dual Protocol Receiver (1) Spektrum Firma 25A Brushed ESC (2) Spektrum S664 25T Steering Servos (1) Dynamite Tazer 37T 380-Size Brushed Motor (1) Spektrum Smart 650mAh 2S 30C 7.4V LiPo Battery with IC2 Connector (1) Spektrum S10 G2 Smart 2S USB-C Charger with IC2 Connector (4) AA transmitter batteries (1) Instruction manual
Needed to Complete: Absolutely nothing!
Features: Capra performance in a size for indoor/outdoor crawling Ready-to-run – no other items required Officially Licensed Mickey Thompson Baja Pro X tires Pro-Line Holcomb Internal Bead-Loc wheels Realistic, high-clearance Capra tube chassis Durable 4-link suspension All-metal universals High-clearance portal axles with Currie F9 housing Spektrum 3-channel SLT3 2.4GHz transmitter Spektrum 5-channel SR515 dual protocol receiver Spektrum Firma 25A brushed ESC Two Spektrum S664 25T steering servos Spektrum Smart 650mAh 2S 30C 7.4V LiPo battery Spektrum S10 G2 Smart 2S USB-C charger
|
|
4-WHEEL STEERING Equipped with 4-wheel steering and a 4WD
drivetrain, the UTB18 4WS mini RC crawler dominates on challenging
trails. Three steering modes – for no rear tire input, mirrored rear
tire input, or “crab crawl” – can be activated from the included
3-channel Spektrum SLT3 2.4GHz transmitter. The unmatched
maneuverability lets you crawl with confidence on rock ledges, over
obstacles, and through tight spots.
|
OFFICIALLY LICENSED TIRES The officially licensed Mickey
Thompson Baja Pro X tires have an aggressive stance and give the UTB18
Capra 4WS the grip to conquer rocky trails, rough dirt tracks, and most
other indoor and outdoor crawling surfaces. The tires are mounted on
Pro-Line Holcomb Internal Bead-Loc wheels. |
|
|
SPEKTRUM ELECTRONICS Adding to the value of the UTB18
Capra 4WS RTR package, Axial includes a 3-channel Spektrum SLT3 2.4GHz
transmitter plus a stand-alone 5-channel Spektrum SR515 receiver and
Spektrum Firma 25A ESC. The receiver accommodates more lighting options
and higher-level transmitters like the Spektrum DX series. Two Spektrum
S664 25T steering servos, a Spektrum Smart 650mAh 2S LiPo battery,
Spektrum Smart USB-C charger, and four AA transmitter batteries are also
supplied. |
CAPRA TUBE CHASSIS Offering realistic trail buggy looks
as well as optimum clearance over rugged terrain, the UTB tube chassis
design has proven to dominate in 1/10 scale and 1/18 scale. In addition
to its popular, well-known styling, the UTB18 cage is available in black
(with the licensed Mickey Thompson Tire livery version) or gray (with
the licensed King Shocks livery version). |
|
|
VERSATILE 1/18 SCALE Similar to the popular 1/10 scale
Axial Capra 1.9 Unlimited Trail Buggy but 1/18 scale, the UTB18 Capra
4WS enables anyone to afford an exceptionally capable rig that offers
the ultimate scale trail experience. Now you can adventure indoors or
outdoors, and in locations with limited area for crawling – and with the
advantage of 4-wheel steering for unrivaled maneuverability. |
4-LINK SUSPENSION Axial has made adjustments to the
4-link geometry to allow for 4-wheel steering without sacrificing the
proven performance and durability of the UTB18 rig. |
|
|
FULLY READY-TO-RUN Fully assembled and finished, the UTB18 Capra
4WS comes with a factory-installed motor, Spektrum 5-channel SR515 dual
protocol receiver, Spektrum Firma 25A brushed ESC, and two Spektrum
S664 25T steering servos. Everything you need to start crawling is
included in the box. Just charge the provided LiPo battery with the
USB-C charger and hit the trails!
|
PORTAL AXLES The UTB18 Capra 4WS axles have a portal
design with a Currie F9 center section. They provide scale authenticity
and maximize the rig's ground clearance for the best crawling
performance. |
|
|
REALISTIC INTERIOR The interior inside the licensed
livery body panels features helmeted driver and passenger figures plus
other realistic details that add to the UTB18 rig's authentic 1/18 scale
crawler looks. |
LED HEADLIGHTS, LIGHT BAR, AND ROCK LIGHTS Axial
highlights the 1/18 scale realism with working LED headlights, light
bar, and forward facing rock lights for crawling after the sun sets. |
Specifications:
Approximate Assembly Time | No Assembly Required | Product Height | 9.3" (236 mm) | Battery | Included | Product Length | 17.1" (434 mm) | Body | Licensed Livery | Product Weight | 4.0 lb (1.8kg) | Charger | Included | Product Width | 8.1" (206 mm) | Chassis | Plastic, multi-piece tube frame | Radio | Included | Completion Level | Ready-To-Run | Receiver | Included | Connector Type | IC2 | Scale | 1/18 | Differential | Spool | Servos | Included | Drive Type | Forward/Reverse | Shock Type | Coil-over, oil-filled | Drivetrain | 4WD | Speed Control | Included | Gear Pitch | 48-Pitch | Spur Gear | 40T | Gear Ratio | 44.88 | Steering Type | 4WS | Ground Clearance | 1.7 in (43mm) | Suspension | 4-Link Solid Axle | Lighting | LED | Tire Type | Pro-Line Mickey Thompson Baja Pro X | LiPo Compatibility | 2S | Vehicle Size | Mini | Motor Size | 380 | Vehicle Type | Rock Crawler, Trail Buggy | Motor Type | Brushed | Wheel Hex Size | 12mm | Pinion | 13T | Wheelbase | 9" (229 mm) | Power Type | Electric | | | Manufacturer's Title: UTB18 Capra 4WS 1/18th 4x4 RTR, Blue
|
|
|
|
|
|
|
|
|