 |
 |
 |
|
The all-electric Ford
Mustang Mach-E 1400
with HPI FLUX power!
This Sport 3 FLUX features the amazing 4WD, all-electric Ford Mustang Mach-E with styling tuned and tweaked by the Fun-Haver himself, professional drifting champion Vaughn Gittin Jr., to become the awesome Ford Mustang Mach-E 1400 prototype, a test bed for advanced materials and technologies. With SEVEN electric motors and super-high downforce levels, it's not just a research vehicle - it's also an all-out performer perfect for a variety of automotive tests, from the drag strip, drift course and race track! The full-size version took over 10,000 hours of development work between Ford Performance and RTR to make sure it bridges the gap between what an electric vehicle can do and what customers tend to believe it can do.
Under the hood, the 1/10th scale version Ford Mustang Mach-E 1400 is equipped with the latest HPI Racing Touring Car chassis, the Sport 3 FLUX! With a full-time shaft drive, fully sealed 4WD drivetrain, brushless motor and waterproof electronics and 2.4GHz radio gear, fully independent double wishbone suspension and adjustable oil filled shocks it’s Ready to Rock in any condition - and HPI FLUX power means it's got plenty of power for 4-wheel drifts and jaw-dropping speeds at the pull of a trigger!
The officially licensed, super realistic Ford Mustang Mach-E 1400 replica features a custom Ford Performance livery to match the car's one-off status, plus molded plastic dive planes, rear wing, side mirrors and diffuser to finish off the custom look!
|
|
ALL-NEW RADIO GEAR
Like all HPI cars, the Sport 3 is easy to drive with the included steering wheel controller.
The All-New 2.4Ghz FHSS TF-50
Transmitter features:
Drop down steering position for a natural control position
Foam covered wheel for extra comfort and grip
Swappable steering wheel design for left handers!
Rubber finger and thumb handle grips
Rubber bumpers on all corners for the highest protection.
Magnetic area on the base for body clips or screws while you work!
Digital on and off switch
Audible warnings if you leave the TF-50 switched on, and if the batteries are low on power!
Servo Reverse, EPA, Trims and Dual Rate switches.
The NEW RF-50 receiver features a waterproof silicone inner jacket for use in any weather and a built-in failsafe - Signal on the RF-50 for the FLUX cars and signal and battery life for the RF-50N on the Nitro!
|
RTR TECH 7 WHEELS
The RTR Tech 7 wheel combines the classic mesh wheel design with a modern, angular look that is both aggressive and functional, yet drenched with muscle car style. For full-size muscle car fans, this wheel is available ONLY for the Ford Mustang in a 20-inch size, however just for you they are perfectly replicated in 1/10th scale on this officially authorized scale replica Ford Mustang Mach-E 1400!
HPI SPEC-GRIP TIRES
Each wheel is wrapped in HPI's tried and tested 26mm SPEC-GRIP rubber tires, complete with multi condition tread and high traction rubber "K" compound for maximum grip on just about every paved surface. You'll get great acceleration, braking and cornering performance from these semi-slick, grippy rubber tires! The tires are molded in a durable, long-wearing rubber compound that will give you a long life for hours of fun and enjoyment.
|
Underneath the detailed replica body is the RS4 Sport 3 chassis, the latest scale touring car chassis from HPI Racing! The HPI RS4 Sport 3 chassis features full-time 4WD, a completely sealed and highly efficient shaft drivetrain, coil-over shock absorbers plus waterproof electronics. The fully contained drivetrain means there are no exposed gears, belts or drivetrain parts to get stuck with rocks or dirt. The car is completely assembled and ready to run, so all you have to do is PLUG IN AND DRIVE!
One-Piece Molded Chassis
The RS4 Sport 3 main chassis is formed from a single piece of reinforced plastic and features the drivetrain tunnel molded right down the middle, just like a real car. It's a step beyond any plastic tub chassis car available today.
Low Profile Layout Design
One of the ways we gave the RS4 Sport 3 the best possible handling was to make sure all the components fit as low as possible in the chassis. This gives the car an amazingly low center of gravity for enhanced cornering capabilities.
3S LiPo CAPABLE
The RS4 Sport 3 features a versatile electronic speed controller that can be used with modern lithium-polymer (LiPo) or nickel-metal hydride (NiMH) batteries. Please note a LiPo adapter plug is not included, your model shop will be able to provide one.
Fits a Wide Variety of Batteries
The RS4 Sport 3 chassis can fit lithium-polymer and nickel-cadmium packs of various sizes, including the extra-long 7-cell Ni-MH packs. Whatever your power requirements, it can hold it all! A thick hook-and-loop strap holds the pack securely in place, and a simple battery block screws into place to allow you to adjust the weight distribution forward or backward for extra steering or acceleration.
HPI Flux Technology for Ultra-Fast Speeds
What sets apart the RS4 Sport 3 Flux from our other offerings is the HPI Flux brushless power installed in every Flux-powered machine. The RS4 Sport 3 Flux is fitted with the awesome Flux MMH-4000 motor, one of our most powerful motors for 1/10th scale cars. Thanks to the robust Flux EMH-3S speed controller, you can strap in your choice of 2S or 3S LiPo power (or a 7.2v-8.4v NiMH battery with a Dean's plug) to give the car an unbelievable power out of the turns and speeds of up to 70mph (124km/h) on the straight, when using optional gearing!
*To achieve 70mph you will need the 114569 - HIGH SPEED GEAR SET and 106401 - PLAZMA 11.1V 3200mAh 35C LiPo Battery Pack
Full-Time Four-Wheel Drive
The RS4 Sport 3 features full-time four-wheel drive to give you the most control and precision on the road or track. All four wheels are driven by heavy duty gear differentials at the front and rear, just like a real car. The extra traction gives you increased acceleration and cornering control for maximum confidence and fun.
Sealed Shaft Drivetrain
The drivetrain of all the RS4 Sport 3 models features the motor mounted longitudinally in the molded chassis, next to the long driveshaft that goes down the center of the car. The entire drivetrain, including the central driveshaft and gear diffs, is completely sealed to prevent dirt, rocks and debris from damaging or binding the drivetrain. The driveshaft, diffs and axles spin on ball bearings to maximize drivetrain efficiency.
Easy Access Differentials
Getting to the differentials for quick adjustments is a matter of removing just 4 screws - this allows you to pop out the diff and change the grease, check the gears or just give it a general service.
4-Gear Metal Diffs
Bevel gear differentials at each end of the car transfer power from the driveshaft to the dogbones and axles that drive each wheel. The all-metal construction allows the drivetrain to withstand powerful brushless motors for easy upgrading in the future. Rubber-sealed ball bearings support the differentials and each diff can be tuned independently by changing the diff grease.
Double-Wishbone Fully Adjustable Suspension
The suspension of the RS4 Sport 3 uses the race-proven double-wishbone suspension design, similar to a full scale modern race car. You’ll be able to control the anti-squat and anti-dive of the front and rear arms using the standard pivot blocks, and the option parts allow you to adjust the sweep and toe angles. You'll also be able to easily change the roll center front and rear with the racing-style vertical ballstud mounting on both the inner and outer camber link mounts. Multiple shock mounting positions provide a full range of shock suspension angle adjustment to suit different road conditions.
Specifications:
Length: 431mm (17")
Height: 127mm (5")
Width: 200mm (7.9")
Wheelbase: 254mm (10")
Includes:
4 AA batteries
What you need:
2S or 3S LiPo pack with T-plug
Battery charger for car battery
LiPo Charge Case
Manufacturers title: Sport 3 Flux Ford Mustang Mach-e 1400 RTR 1/10th Scale 4WD Car
|
|
|
 |
|
 |
|
