![](/v/vspfiles/templates/RPP-2-19-20/images/clear1x1.gif) |
![](/v/vspfiles/assets/images/Arb-logo.jpg)
Created to illuminate the immediate road ahead, the super bright RC4WD ARB Intensity LED Light Set will not only add to the scale look of your RC truck, but also light up your crawling at night. The popularity of these lights in the full scale off-road community motivated us to create these in 1/10 and we hope you like them as much as we do. They can be mounted in any position on the trucks body, and most bumpers as long as you are comfortable drilling a few small holes. The light also tilts up and down, so grab a few sets of these and you will be lighting up the trail in all directions.
Specifications: Plastic Molded Housing ABS Plastic Injection Molding Super Bright Lighting Standard Receiver Plug Connects to Extra Channel on Receiver Capable of 6v-11.1v 1.6mm Mounting Holes Overall diameter: 0.77in / 19.5mm Overall Width: 0.87in / 22.1mm Overall Height: 0.46in / 11.6mm Overall Weight: 0.29oz / 8.2g
What's Included: 1x RC4WD ARB Intensity LED Light Set 4x Socket Head Cap Screws M1.6 x 6mm 4x Regular M1.6 Nuts (Black) 1x ARB Decal Sheet
Replacement Hardware: Socket Head Cap Screws M1.6 x 6mm (10) (Z-S0752) Steel Head Socket Cap Screws M1.6 x 2mm
Optional Parts: RC4WD Mini ON/OFF Switch for Lighting Unit (Z-E0081) RC4WD Strobe Lighting Unit (Z-S1573)
Notes: Fits RC4WD Trail Finder 2 "LWB" RTR w/Mojave II Four Door Body Set (Z-RTR0030) Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024) Fits RC4WD Gelande II RTR Truck Kit w/Cruiser Body Set (Z-RTR0029) Fits RC4WD Gelande II RTR Truck Kit w/D90 Body Set (Z-RTR0031) Operational Range is 6V-11.1V. Using above 11.1V will cause damage to the lights and void the Warranty. We recommend powering the lights with a BEC.
ARB is a registered trademark of the ARB company. The ARB logo is property of ARB and used under license to RC4WD.
Shown installed on RC4WD Marlin Crawler Trail Finder 2 RTR w/Mojave II Crawler Body (Z-RTR0034) for example (Not Included)
Installing in the location shown in the image will require custom holes to be drilled.
|
|
![](/v/vspfiles/templates/RPP-2-19-20/images/clear1x1.gif) |