|
Quick Notes: – replaces stock Traxxas #2530 & #2530A –
fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro
Rustler, nitro Stampede & electric Stampede 2wd (including all
Stampede 2wd variants)
One of the most highly sought-after RPM
parts is here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd
vehicles is the ultimate in design, strength and durability.
Our
engineers reviewed the stock front bulkhead and found something curious.
The stock front bulkhead does not sit flat, which can seriously affect
suspension settings and adjustments! The RPM Front Bulkhead sits
flawlessly level, meaning your front kick angle and A-arm angles will be
perfect. A proper fit provides a superior platform for precise
suspension adjustments.
We also cored out the bottom of the
bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next,
it significantly reduces the weight of the bulkhead. Our version is
more that 15% lighter* than stock! By coring out the bottom of the
bulkhead, it allows a convenient place to stick some modeling clay to
adjust the weight bias of the truck. Leave the weight out if you want
the front light; add it in if you want it heavier. We also include a
handy dust plate to cover the bottom of the bulkhead on vehicles such as
the Rustler, Stampede and Bandit that leave the bottom exposed. The
dust plate prevents build-up of dirt and debris, which could affect the
handling and weight of the truck.
Each RPM Front Bulkhead is
built from our bulletproof blend of engineering grade nylons, made right
here in the USA and comes with our limited lifetime warranty against
breakage. If you want strength you can count on and engineering you can
trust, look no further than RPM!
Tech Notes: RPM Front
Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement
parts. They replace stock Traxxas #2530 & #2530A. This bulkhead fits
the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric
Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd
(including all Stampede 2wd variants). It does not fit the 4×4 versions
of any of these vehicles.
*Weight comparison is based off of the stock bulkhead versus the RPM Front Bulkhead without the dust plate installed.
|
|
|