Tekin RS Pro Black Edition BL Sensored / Sensorless ESC

Home > Electronics > ESC's - Speed Controls >

More Photos:

RPP Price: $229.99

Note: Coupon discounts not allowed
by manufacturer

STOCK STATUS:
In Stock!

Part Number: TEKTT1160

Qty:

Description

The RS PRO Black Edition utilizes both hardware and software advances recently developed for our latest ESC lineup. With its industry-leading Dual Power Board design providing Ultra Low Resistance, you can be sure that your motor is getting all the power you can give it. Dual Power Boards double the amperage, giving you more power, smooth control and reliability you can count on. The RS PRO Black Edition is over-engineered for ultimate performance.

The RS PRO Black Edition was specifically designed for 2S Drag Racing to take full advantage of the ULR circuit design. ULR FlexWire is included with every Black Edition ESC. Pair the RS PROs with a 13.5T, 17.5T or 21.5T SPEC-R motor for the ultimate Ultra Low Resistance SPEC system! This ESC is not intended to be used with the 6.5T SPEC-R motor or modified track racing applications.

For 1/10 scale 2WD/4WD Buggy, Stadium Truck and Modified Touring Car we recommend the RSX Modified ESC as these setups tend to run at higher temperatures. The billet housing and fan shroud on the RSX provide sufficient cooling.

Features:
Bluetooth Wirless Mobile and USB PC Tuning with the HotWire 3.0
ULR: Ultra Low Resistance Design
Double Stack FET Boards
Specifically Designed for Spec & Stock Racing
3rd Channel Input for On-The-Fly Drag Brake Adjustments <<setup>>
QuickTune™ One Touch Programming
Adjustable Torque Control *
Adjustable Throttle and Brake Frequencies *
High Voltage Programmable BEC *
HotWire™ Programming Port *
Data Logging Capability *
On-Board Sensor Checker
On-Board Temperature Indicator
ESC Self Diagnostics with Error Codes
Fully Proportional Forward/Brake/Reverse
Brushless and Brushed Motor Drive
Sensored or Sensorless Operation
LiPo Safe with Custom Voltage Cutoffs
Sensor Plug for Precise Commutation
Lightweight Chassis Design
HDAC: High Density Copper PCB's
Ultra-smooth and Precise Throttle and Braking Control

ON BOARD QuickTune™ PROGRAMMABLE FEATURES:
DB - Drag Brake (13 steps)
BS - Brake Strength (13 steps)
LM - Torque Limiter (7 steps)
NW - Neutral Width (13 steps)
TP - Timing Profiles 5 Preset - 2 Custom*
MT - Motor Type
Brushless Modes - FWD Only / FWD-REV / FWD-REV Delay / FWD-REV Delay REV Motor Direction
Brushed Modes - FWD Only / FWD-REV / FWD-REV Delay
VC - Voltage Cutoff : RS PRO 2S, 3S, Custom*

* requires HotWire™ sold separately.

Specifications:
Controls: Forward/Brake/Reverse
Input Voltage: RS PRO: 1S-3S LiPo / 4-9S NiMH-NiCD*
Motor Limit Brushless Mode:

2S Drag Racing - 2.5T 2-pole 36mm Can
2S Track Racing - 8.5T 2-pole 36mm Can

Motor Limit Brushed Mode:

2S - 6 Turn 36mm Can

Max Current: 560amps per phase**
ON Resistance: .000096ohm**
BEC: 6.0v / 7.4v @ 5.5amps
Dimensions: 1.0 x 1.3 x .68" / 24.5 x 33 x 17.25mm
Weight: 1.23oz / 35g

*RS PRO requires a booster for 1S LiPo operation.
**per manufacturer spec

SPEC OFF ROAD
1:10 2WD Buggy 13.5T / 17.5T
1:10 2WD Truck 13.5T / 17.5T
1:10 2WD Short Course 13.5T / 17.5T
1:10 4WD Buggy 13.5T

SPEC ON ROAD
1:12 2WD SPEC Pan Car 13.5T / 17.5T
1:10 2WD SPEC Pan Car 13.5T / 17.5T
1:10 World GT 21.5T
1:10 2WD Formula 1 21.5 / 25.5T
1:10 4WD Touring Car 13.5T / 17.5T

SPEC OVAL
1:10 2WD 13.5T / 17.5T
1:10 SK Car 13.5T / 17.5T
1:10 Stock Car 13.5T / 17.5T
1:10 Winged Sprint 13.5T / 17.5T

DRAG RACING
1:10 No Prep
1:10 Pro Stock
1:10 Pro Mod
1:10 Rail

The RS PRO is not recommended for any 2S Modified track racing applications as there is no heat sink or fan. Please see the RSX PRO for your Modified Racing needs!