{"product_id":"bow-b24-0010","title":"Bowhouse RC Low CG Conversion Kit for Axial SCX24","description":"Tiny #tinytrucks are all the rage, and the Axial SCX24 is leading the charge.  You can take your little dynamo to the next level with our BowHouse RC Low CG Conversion Kit for the SCX24.  \u003cbr\u003e\u003cbr\u003e\u003cb\u003eHere are the highlights:\u003c\/b\u003e\u003cbr\u003eLow CG battery tray drops the battery by 4mm down to the top of the rails\u003cbr\u003eLow CG ESC tray rotates and lowers the ESC below the rails\u003cbr\u003eESC tray includes integrated shock mounts in 2 positions for compatibility with all SCX24 models\u003cbr\u003eOption to install battery on ESC tray and ESC on battery tray for maximum forward weight bias\u003cbr\u003eReuses stock hardware for installtion\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003e1x low CG battery tray*\u003cbr\u003e1x low CG ESC tray\u003cbr\u003e\u003cbr\u003e\u003ci\u003e* Epic Helios RC 2S 600 mAh 45C Lipo sold separately, but you knew that already.\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eINSTALLATION NOTES\u003c\/b\u003e\u003cbr\u003eBattery tray:\u003cbr\u003eRemove the stock battery tray by removing all 4 screws holding it in place.  Save screws for installation of BowHouse battery tray.\u003cbr\u003eGently spread the chassis rails to remove the stock battery tray from the chassis. \u003cbr\u003eRemove the stock hook-and-loop strap from the stock battery tray and install on BowHouse RC battery tray.\u003cbr\u003eBefore installing the BowHouse battery tray, start a screw into each screw hole in the BowHouse tray for 3-4 turns.\u003cbr\u003eGently spread the chassis rails to insert the BowHouse battery tray in chassis.  You may need to gently bend the upper motor lead down for better clearance.\u003cbr\u003eInsert all 4 screws to secure BowHouse battery tray to chassis.\u003cbr\u003e\u003cbr\u003eESC mount:\u003cbr\u003eRemove the stock body mount(s) from the shock towers and save stock screws.\u003cbr\u003eRemove the stock ESC from the stock ESC mount carefully.  If removed carefully, you can reuse the double stick tape on the bottom of ESC.  If necessary, remove the original double-stick tape and replace with new tape, hot glue, or other adhesive.\u003cbr\u003eUnscrew upper ball studs securing front shocks to shock mounts.\u003cbr\u003eRemove 4 screws holding stock ESC tray in place.\u003cbr\u003eBefore installing the BowHouse ESC mount, start a screw into each screw hole in the BowHouse mount for 3-4 turns.\u003cbr\u003eGently spread chassis rails to remove stock ESC tray and insert BowHouse ESC tray into chassis.\u003cbr\u003eInstall 4 screws holding ESC mount to chassis.\u003cbr\u003eAttach shock ball studs to shock mounts in the appropriate position.  Note that shocks are mounted in front of body mount posts on certain models (e.g., Jeep Wrangler and C10 versions) and behind body posts on other models.\u003cbr\u003eInstall ESC on ESC mount.  For certain models (e.g., Betty and Jeep Wrangler), ESC should be rotated so that the servo wire plugs are on the drivers (left) side and the motor and battery plugs are located toward the front of the truck.  On other models, the ESC can be installed with the servo wire plugs in front and the motor and battery plugs on the passenger side, similar to the stock configuration.\u003cbr\u003eIf the ESC is mounted in the rotated position, we recommend running the servo lead through the space between the chassis rail and the BowHouse ESC mount on the drivers side (see pictures).\u003cbr\u003eInstall body mount(s) into BowHouse RC low CG ESC tray using stock screws.  We recommend using a sewing needle or pin to line up screw holes in ESC tray and body mount(s) before starting the screws.\u003cbr\u003eYou may need a short servo extension to plug lights into ESC if you are using stock headlights. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFOR BATTERY FORWARD CONFIGURATION\u003c\/b\u003e\u003cbr\u003eFollow the same steps to remove stock battery tray and ESC mount.\u003cbr\u003eInstall hook-and-loop battery strap into BowHouse ESC mount instead of on battery tray.\u003cbr\u003eIf you are using stock headlights, you will need a short servo extension cable to connect the lights to the ESC.  On some models, you will also need a short servo extension cable to connect the servo to the ESC.\u003cbr\u003eBattery forward configuration may result in nearly full droop on front shocks depending on your setup.","brand":"BowHouse RC","offers":[{"title":"Default Title","offer_id":44181489123364,"sku":"BOW-B24-0010","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/BOW-B24-0010-2.jpg?v=1783348604","url":"https:\/\/rpphobby.com\/products\/bow-b24-0010","provider":"RPP Hobby","version":"1.0","type":"link"}