{"product_id":"vps08360","title":"Vanquish Products Currie Portal F9 SCX10 II Rear Axle Black Anodized","description":"\u003cb\u003eCurrie F9 Portal Rear Axle for SCX10 II based vehicles\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe F9 Portal axles create extreme amounts of ground clearance under the center of your axle, increasing the clearance by 1\/2\"+ (13mm). This provides the equivalent of a tire over 1 inch taller than what is on your vehicle. The advantage of the Vanquish Currie F9 Portals is the gear reduction inside the portal (1.67:1) which can be adjusted with optional gear sets (1.4:1 Overdrive*). By adding reduction at the portal, less torque is transferred through the other upstream components in the drivetrain. These axles are a direct replacement to any Axial AR44 axle, using all stock links. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThese axles come with all parts needed to assemble a full front axle.\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\n\u003cul\u003e\n\t\u003cli\u003e    Portal box integrated into the rear housing for the most clearance at the axle ends possible and a more scale appearance\u003c\/li\u003e\n\t\u003cli\u003e    Gear reduction in the portal of 1.67:1 (18\/30), Optional Overdrive Ratio* of 1.4:1 (20\/28)\u003c\/li\u003e\n\t\u003cli\u003e    Included Vanquish AR44 machined gear set\u003c\/li\u003e\n\t\u003cli\u003e    Overall axle reduction of 6.26:1 with stock portal ratio\u003c\/li\u003e\n\t\u003cli\u003e    13mm increase in ground clearance\u003c\/li\u003e\n\t\u003cli\u003e    Hex to hex width of 7.66 inches, only roughly 5mm wider than a stock AR44 axle with a narrow hex\u003c\/li\u003e\n\t\u003cli\u003e    Chromoly inner rear axle shafts are triple bearing supported\u003c\/li\u003e\n\t\u003cli\u003e    Chromoly stub shafts with 6mm design at the drive pin which tapers down to a 5mm thread for ultimate strength\u003c\/li\u003e\n\t\u003cli\u003e    Chromoly spool\u003c\/li\u003e\n\t\u003cli\u003e    Aluminum 12mm hex with set screw\u003c\/li\u003e\n\t\u003cli\u003e    Uses all SCX10-II linkage\u003c\/li\u003e\n\t\u003cli\u003e    Complete Fast Eddy Bearings kit\u003c\/li\u003e\n\t\u003cli\u003e    Licensed by Currie Enterprises\u003c\/li\u003e\n\t\u003cli\u003e    Comes with One Piece Bearing Retainers (Patent Pending)\u003c\/li\u003e\n\t\u003cli\u003e    Double shear shock mounts\u003c\/li\u003e\n\t\u003cli\u003e    Upper link mounts built into third member\u003c\/li\u003e\n\t\u003cli\u003e    Increased upper link clearance for more suspension up travel ability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003e\u003cbr\u003eNote:\u003c\/b\u003e\u003cbr\u003eRequires the use of a 350 SLW hub or greater on Vanquish 1.9 wheels, Incision wheels will require a #4 or greater. Other wheel manufacturers offsets will vary. Axles must be used in pairs, you cannot run a front portal axle without a rear and vice versa.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*Overdrive gear sets are recommended for use in the front axle only\u003c\/b\u003e\u003cbr\u003e","brand":"Vanquish Products","offers":[{"title":"Default Title","offer_id":44181881290788,"sku":"VPS08360","price":249.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7053\/7508\/files\/VPS08360-2.jpg?v=1783349468","url":"https:\/\/rpphobby.com\/products\/vps08360","provider":"RPP Hobby","version":"1.0","type":"link"}